Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-137
SNMP configuration
The
SNMP
configuration page provides a user with a means to configure the
SNMP
agent and
the associated traps (see Figure 2.114).
Figure 2.114: User Settings - SNMP Configuration
Configure the
SNMP
agent as follows:
1. Enter the first five fields, noting the following:
•
Agent Port:
Enter the UDP port where the SNMP agent checks for requests. The
default setting is 161. If your transmitter is behind a firewall, you must open this
port to use SNMP.
•
Read Community:
Enter the password for the SNMP client application to allow
acquisition of channel values. Provide confirmation of this password by re-entering
it in the
Confirm
field.
•
Write Community:
Enter the password for the SNMP client application to allow
changing of channel values. Provide confirmation of this password by re-entering it
in the
Confirm
field.