Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-139
Critical parameters
You can capture critical parameter data for the transmitter’s current state using the AUI’s
Critical Parameters
page (see Figure 2.115). To view this page, select
Critical Parameters
from
the
User Settings
page. From this page, you can press
Capture Meters
(reads all meter values),
Capture Alarms
(reads all active alarms),
Capture Presets
(reads the current active preset) and
Capture Settings
(reads current settings, e.g., active exciter, threshold settings, scale factors,
etc.). Once you press the
Capture
button, you can press the associated
Copy
button to copy the
data to your computer’s clipboard facility. The data copies in a tab-delimited format and is
ideally suited for pasting into a spreadsheet program.
Figure 2.115: User Settings - Critical Parameters