Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-162 Issue 10.0 2019-01-18
Configuring Remote Inputs and Outputs
You can configure your remote input/output interface for the transmitter using the remote
AUI (see Remote I/O Settings - Using the AUI) or using the local front panel UI (see Remote
I/O Settings - Using the Front Panel UI on page 2-172).
Refer also to the VS300 Pre-installation Manual for information on remote inputs and outputs
and their factory default settings.
Remote I/O Settings - Using the AUI
To view the
Remote I/O
page (see Figure 2.139), select
Remote I/O
from the
Menu
options.
Click
X
in the upper, right corner to close this page and return to the home page.
Figure 2.139: Remote I/O Page (Remote Inputs tab shown)
Select the
Remote Inputs
(see Remote Inputs - AUI on page 2-163) or
Remote Outputs
(see
Remote outputs - AUI on page 2-165) tab to view or edit detail on the remote inputs or
outputs.
Note:
This function is only available via remote connection to the AUI. However, you
can view the status of remote inputs and outputs on the front panel display.