Operations and Maintenance Manual

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-169
Site Control Settings
You can use the AUI’s Site Control page (see Figure 2.144) to locally or remotely configure
remote inputs and outputs for use with external site control equipment (air conditioner, etc.).
This page allows the user to create and configure custom inputs and outputs and assign them
for use using the Remote Inputs and Remote Outputs pages.
To view this page, select
Remote I/O from the Menu options and select the Site Control tab.
Press
X in the upper, right corner to close this page and return to the Home page.
Figure 2.144: Remote I/O Page - Site Control
Adding or Editing a Site Control Rule
Selecting the Add or Edit button displays the rule editing window (see Figure 2.145 on page 2-
170) for site control inputs and outputs. This window allows you to create a new site control
rule or edit an existing one. Each custom input or output can be assigned a name, severity level
and trigger parameters (active state and time delay). Each rule can also be set to latch (i.e.,
requiring a reset) or log with the rest of the transmitter’s alarm and status signals, upon its
occurrence. You can use Boolean logic expressions to perform ‘AND’, ‘OR’ and ‘XOR’
(exclusive OR) functions on multiple inputs or rules.
Use the
Edit Site Control Rule window as follows: