Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-172 Issue 10.0 2019-01-18
Remote I/O Settings - Using the Front Panel UI
To view the
Remote I/O
screen (see Figure 2.146) on the front panel display, select
User
Settings -> Remote I/O
from the
Main Menu
.
Figure 2.146: Remote I/O screen
Use the up and down buttons to select
Remote Inputs
(see Remote Inputs - Front Panel on
page 2-172),
Remote Outputs
(see Remote Outputs - Front Panel on page 2-173) or
Analog
Outputs
(see Analog Outputs - Front Panel on page 2-174) to view or edit detail on the selected
inputs or outputs.
Remote Inputs - Front Panel
Using the
Remote Inputs
screens (see Figure 2.147), you can configure up to 10 inputs that
allow you to remotely control various operational characteristics of the transmitter. Unless
otherwise noted, these inputs are only accepted by the transmitter if remote control is enabled.
That setting can only be made by a local user using the front panel UI.
Nautel sets remote input defaults before shipping. See the VS300 Pre-installation Manual for
details.