Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-176 Issue 10.0 2019-01-18
Scheduler
If the scheduler is enabled (see Enabling the Scheduler on page 2-177), you can program a preset
schedule for the transmitter. Use the
Scheduler
page (see Figure 2.150) to set the dates and
times at which presets take effect. You can define up to 63 different schedule rules. To view the
Scheduler
page, select
Scheduler
from the
Menu
options.
Figure 2.150: Scheduler page
The left-hand side of the
Scheduler
page displays a monthly calendar (e.g., September 2013).
Use the
<<
and
>>
buttons to navigate between months. Use the
<
and
>
buttons to navigate to
the beginning and the end of the schedule.
The right-hand side of the
Scheduler
page contains a
Rules
section and a
Daily Events
section.
All programmed rules are displayed in the
Rules
section. Clicking on a specific date in the
monthly calendar displays the rules and daily events, as applicable, for that day.
Figure 2.151: Rule Explorer window