Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-184 Issue 10.0 2019-01-18
Enabling and Operating the Orban Audio Processor
This section describes how to configure, enable and operate the optional Orban audio
processor after it is installed in your transmitter. You can interface with audio processor
functionality locally, using the front panel UI or the remote AUI. The extent of the features
available depends on which interface is used.
• Configuring the Transmitter for the Orban Audio Processor - see page 2-185
• Enabling the Orban Audio Processor for Preset Selection - see page 2-186
• Selecting an Orban Audio Processor Preset - see page 2-188
• Managing an Orban Audio Processor Preset - see page 2-190
Note:
Using the Orban Inside option requires the installation of an Orban audio
processor card in your transmitter. If you had a pre-existing transmitter when you
received your Orban Inside kit, verify that the Orban card has been installed in
the transmitter according to the NVLT - Orban Inside Quick Guide (QG12001),
provided with the Orban Inside kit. Refer to the Pre-installation and Installation
Manuals for information on purchasing and installing this option.
Note:
This section contains frequent reference to Orban's Optimod-FM 5500 Digital
Audio Processor Operating Manual (see the link below). The equipment covered in
the 5500 manual uses the same Orban audio processor as in your transmitter. The
5500 manual provides detailed information on the audio processor's
functionality. If a discrepancy exists between the operational instructions in the
Orban manual and this document, the latter shall prevail as this document is
specific to operation with an VS300 transmitter. View the Orban Optimod-FM
5500 Digital Audio Processor Operating Manual online at:
ftp://ftp.orban.com/5500/Documentation/
(the version number referenced in this link is controlled by a third party and is
subject to change without notice)