Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Non-standard maintenance
Issue 10.0 2019-01-18 Page 4-3
6. In the Local Area Connection Properties window, select
OK
.
7. In the Local Area Connection Status window, select
Close
.
8. Close the Network Connections window.
Transfer software upgrade file to transmitter
1. If using a laptop, connect the laptop network interface card to the transmitter
LAN
(A1J8A)
connector on the rear panel using a CAT5 Ethernet cable. Open Internet
Explorer and search for 10.10.10.2. The transmitter login screen should appear.
2. If using a network computer, open Internet Explorer and search for the IP address
recorded in Step 2 of “Transmitter IP configuration” on page 4-2. The transmitter
login screen should appear.
3. At the transmitter login screen enter:
– User: “Nautel” or “****”, where **** is the user assigned user name
– Password: leave blank (default) or “****”, where **** is the user assigned password
4. Navigate through the AUI to
Menu
/
System Settings
/
Upgrade Software
and press
Manage Files/Browse
. Locate the software update
*.tgz
file and press
Upload
to load
the file into the transmitter Select Upgrade File list.
Note:
For port-forwarded transmitters, uploading of the .tgz file must occur locally or on
the transmitter side of the router.