Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-10 Issue 10.0 2019-01-18
LCD display
This display shows all the UI screens. The display’s top level screen, used for viewing purposes
only, is shown in Figure 2.4.
Figure 2.4: Top Level Screen
The top level screen displays the following information:
• Line 1: current time, active preset (P#) and the transmitter’s actual forward power.
• Line 2: RF operating status (ON or OFF), the local (LCL) or remote (RMT) control
status and the transmitter’s reflected power level.
• Line 3: operating frequency and the desired power set point.
• Line 4: instructions to turn the transmitter’s RF power stage on or off.
Front Panel UI - Main menu
This main menu is the starting point for navigating through the UI screens. See Table 2.1 on
page 2-12 for a list of screens and their basic functions.
Figure 2.5: Main Menu
Navigational
Buttons
LCD Display
Cursor
LEDs