Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-13
User Settings - Edit Presets -
Mod Loss
Edit the selected preset’s modulation loss functionality,
such as enable/disable, setting threshold, setting timeout
period, setting resulting action and selecting a backup
preset.
page 2-93
User Settings - Edit Presets -
Audio Delay
Edit the selected preset’s audio delay. page 2-95
User Settings - Edit Presets -
Copy Another Preset
Copy the selected preset’s settings to another preset. page 2-95
User Settings - Set Clock Set precise time and date. page 2-146
User Settings - Network
Settings
View and/or set network information such as MAC address
(view only), DHCP on/off status, IP address, netmask and
gateway.
page 2-127
User Settings - Pilot Sample Set the pilot sample level for the rear panel BNC
connector.
page 2-154
User Settings - Signal Gen Enable/disable and setup the internal signal generator. page 2-155
User Settings - Station ID Set station ID parameters for re-broadcasting primary
information as a secondary station.
page 2-157
User Settings - Ext. 10 MHz
Inp
Enable/disable the use of an external 10 MHz signal. page 2-141
User Settings - Scheduler Set up scheduler page 2-178
User Settings - FM Mask Select the FM mask - FCC, ETSI or None (turns off mask). page 2-143
User Settings - Audio Low Set the low audio thresholds and associated timeout
delays.
page 2-152
User Settings - Fwd Low Set the low forward power and very low forward power
thresholds.
page 2-159
User Settings - Turn-On
Delay
Set the transmitter turn-on delay period. page 2-160
User Settings - Ramp-Up
Speed
Set the transmitter’s ramp-up speed. page 2-161
Table 2.1: Front Panel UI Screens
UI Screen Function See Page