Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-25
Filter Logs
You can filter transmitter events based on their origin or date by clicking the
Filter Logs
button
in the log manager (see Figure 2.10 on page 2-24).
Click the
Device Type
drop-down arrow, and select the desired device type to filter events based
on the type selected. Click the
OK
button or the
Cancel
button when done.
–
All
- displays all transmitter events
–
Controller
- displays controller events only
–
Exciter
- displays exciter events only
Click the
Filter by Date
checkbox to filter events based on a selected date and time range, and
the device type selected. Click the
OK
button when done. Click the
Cancel
button to close this
window and discard changes.
Copy Logs
You can create a copy of all the logs in the selected list (copied to the remote user’s computer
clipboard) by clicking on the
Copy Logs
button in the log manager (see Figure 2.11). You can
paste the tab-delimited text copy of the logs into a text editing program such as Word, Excel,
Notepad, etc. Click
Cancel
to close this window.
Figure 2.11: Copy Logs
Delete
You can delete all events or a selection of events by clicking on the
Delete
button in the log
manager (see Figure 2.12 on page 2-26).
Note:
Clearing the remote AUI’s logs does not clear the logs shown in the front panel UI.