Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-49
Figure 2.36: VSHD Meter List View Window (Controller Shown)
Identifying meter information on a specific sub-device
1. Open the
Meters List View
window and select one of the desired transmitter sub-devices.
– Controller
–Exciter
–HD Exciter (with VSHD connected)
2. Under
Transmitter Layout
, press the information button
(i)
beside a device type. This will
open an information window in tabular format (see Figure 2.36).
3. To choose individual meters for display in the
Meters
window of the
Home
page: Select
the device type name in the
Transmitter Layout
panel and select the checkbox next to the
desired meters shown in the
Relevant Meters
panel (see Figure 2.36). If the
Relevant
Meters
panel contains more than one page of information, use the scroll bar (right-side) to
find the desired meter.
Note:
When a meter value is updated, a blue box briefly appears around that value.
Typically, updates occur every one or two seconds.
X
to close/delete
Scroll Bar
Information
Buttons
(displays full set
of meters for
specific
sub-device)