Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-51
Saving a meter list
To save meter specifics for display on the
Home
page:
Open the
Meter List Save
window from the
Home
page using the floppy disk button
(Figure 2.38).
• Press
Save As
to save the currently displayed meters. Enter a name in the
Layout
Name
entry box and press
OK
.
• Press
Delete
to discard the selected meter list.
• Press
Set Default
to set the selected meter list as the default for the current user
account. The * symbol shows the default.
• Press
Save
to overwrite the selected meter list with the currently displayed meters.
• Press
Load
to display the meters saved under the currently selected meter list in the
Meters
panel on the right-hand side of the
Home
page.
Figure 2.38: Meter List Save Window
Note:
Meter lists are associated with user accounts. Lists saved in this screen are only
displayed in the current user account. Setting a list as default will define the meters
that will appear when logging into the current account (or after an ac power
interruption in the local AUI if this is the default user account).