Technical Instruction

Page 2-2 VSHD Exciter Technical Instruction Manual
Issue 2.0 Section 2 Installation
2.2.3 Mounting in Equipment Rack
When mounting the equipment in a standard 19” equipment rack, provide adequate support
at the bottom of the VSHD exciter. The VSHD exciter cannot support itself through front
panel mounting only. New rail mounting hardware is provided. Airflow and cooling must also
be considered. For ease of interconnection with the associated VS transmitter
(interconnecting cables are provided by Nautel and are fixed length), mount the VSHD
directly above or below the VS transmitter.
The following instructions detail how to mount the VSHD in a cabinet. Use the parts provided
in the Packing Supplies (see Table 2-1) to install the VSHD exciter.
Table 2-1:
Packing Supplies, VSHD Exciter – Nautel Part # 211-8981-01
ITEM #
LETTER
QTY
NAUTEL PART #
DESCRIPTION
2
-
1
211-3005
Ancillary Kit, VSHD
3
-
1
211-8982-01
Installation Kit, VSHD
4
E
2
211-8042-01
Slide Bracket 1
5
C
2
211-8044-01
Slide Bracket 2
6
A & B
1
HAS79
Slide Pair, Telescopic
7
D
2
211-8044-02
Slide Bracket 3
Tools Required:
# 1 and # 2 Philips head screwdrivers
7 mm nut driver (suitable for M4 hardware)
2.2.3.1 Parts Required
The following parts are required for the installation, see Figure 2-1 (included with the VSHD
exciter). Parts are separately bagged and identified with their Nautel Part # (e.g., HB14).
Cross-reference the Nautel Part # with the letter shown in Figure 2-1. These letters are used
to identify the hardware in the following illustrations. Locate and set aside all parts before
beginning. Additional parts included with your VSHD exciter are not utilized.