Product Warranty

20
7. Rollthemachineonthetransportwheelstoitsnewlocation.
Donotputobjectswherethewalkingdeckwouldbeiflowered.
NOTICE: Move the machine carefully so that it does not hit other objects. This can damage the Console operation.
8. Priortouse,refertothe“UnfoldingtheMachine”procedureinthismanual.
Unfolding the Machine
1. Make sure there is sufficient space to lower the walking deck.
Keepaminimumclearancebehindthemachineof79”(2m)and24”(0.6m)oneachside.Thisistherecommended
safe distance for access, movement and emergency dismounts from the machine.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may hamper your
ability to move freely with a sufficient clear workout area. A rubber mat below the machine is recommended to prevent
electrostatic discharge and protect your floor.
Besurethattheworkoutspaceyouareutilizinghasadequateheightclearance,takingintoconsiderationtheheightof
theuserandthemaximuminclineofthedeck.
2. Make sure there is no object on or around the treadmill to spill or cause blockage from the fully unfolded position.
3. Slightly push the walking deck forward toward the console. With your left foot lightly push the top part of the hydraulic lift
forwarduntilthelockingtubereleasesandyoucanpullthewalkingdeckawayfromtheconsole.Holduptherearofthe
walking deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
4. Thehydraulicliftissetuptodroplightly.Holdontothewalkingdeckuntilapproximately2/3ofthemovementdown.
Make sure that you use proper lifting technique; bend your knees and keep your back straight. The walking deck can
possibly drop quickly in the last part of the movement.