User Manual

Note: Your machine may not match the image. For reference only.

1. Loosen and remove the old Pedals. Discard the old

Pedals.

Note:TheLeftPedalisreverse-threaded.Orientationis

based from a seated position on the bike. The Left

Pedal has an “L”, the Right Pedal an “R”.

2. Install the new Pedals. Carefully align the threads and

handtightentopreventcross-threading.Thentightenfully

with pedal wrench.

Note: The Left Pedal is reverse-threaded. Be sure

to attach Pedals on the correct side of the Bike.

Orientation is based from a seated position on the

bike. The Left Pedal has an “L”, the Right Pedal an

“R”.

3. Final Inspection

Inspect your machine to ensure that all hardware is tight and

components are properly assembled.

Do not use until the machine has been fully

assembled and inspected for correct performance

in accordance with the Owner’s Manual.

(L)

(R)

(L)