User Manual

39
Note: Your machine may not match the image. For reference only.
1. Press the edges of the Console Pivot Shroud to disen-
gage the tabs from the Console. Remove the Console Pivot
Shroud and set it safely aside.
2. Remove screws that attach Console to the Mast. Care-
fully lift the Console off the Mast.
3. Disconnect the Data Cable, Heart Rate Cable and Re-
sistance Cable at the top of the Mast. Set the Console and
screws safely aside for reassembly.
Note: Do not let the cables fall down inside the Mast. This
step may require two people.
4. Remove the Handlebar Bracket Cover and set it safely
aside for reassmbly.
5. Grasp the section of HR Cable and Resistance Cable
under the Handlebar Bracket and carefully pull the cables
down through the Mast and out of the hole in the Handlebar
Bracket.
Note: Do not let the Data Cable fall down inside the
Mast.
Disconnect all power to the machine before you service it.