User Manual

40
6. RemovetheT-handleandwashersthatattachthe
Handlebar to the Mast. Set them safely aside for reassembly.
NOTICE: Hold the Handlebar so that it does not fall.
7. Remove the Handlebar and set it safely aside for
reassembly.
8. Remove the Mast Gasket.
9. Removethehardware(indicated)fromtheMast.Gently
pull the Mast out and disconnect the cables. Set the hard-
ware, Mast Gasket and Top Shroud safely aside for reas-
sembly. Discard the old Mast.
NOTICE: Do not crimp the cables. This step may require
two people.
Note: Do not let the cables fall down inside the Frame.
10. Install the replacement Console Mast and the Mast
GasketonMainAssembly.
NOTICE: Make sure the Console Cable connector does
notfallintotheConsoleMast.Aligntheclips
on the cable connectors and make sure the
connectors lock. Do not crimp Console Cable.
X2
Cable connectors