User Manual

Note: Your machine may not match the image. For reference only.

1. Press the edges of the Console Pivot Shroud to disen-

gage the tabs from the Console. Remove the Console Pivot

Shroud and set it safely aside.

2. Remove screws that attach Console to the Mast. Care-

fully lift the Console off the Mast.

3. Disconnect the Data Cable, Heart Rate Cable and Re-

sistance Cable at the top of the Mast. Set the Console and

screws safely aside for reassembly.

Note: Do not let the cables fall down inside the Mast. This

step may require two people.

4. Remove the Mast Gasket. Set it safely aside for

reassembly.

5. Remove the hardware (indicated) from the Mast. Gently

pull the Mast out and disconnect the cables. Set the hard-

ware safely aside for reassembly.

NOTICE: Do not crimp the cables. This step may require

two people.

Note: Do not let the cable fall down inside the Frame.

Disconnect all power to the machine before you service it.

Cable connectors