User Manual

52
NOTICE: It is necessary to remove the Shrouds for this procedure. Refer to the “Replace the Shrouds” procedure.
It is necessary to adjust the Drive Belt tension at the end of this procedure. Refer to the “Belt Tension Adjustment” procedure.
Note: Your machine may not match the image. For reference only.
1. Carefully remove the Shrouds. Refer to the “Replace the
Shrouds” procedure in this manual.
2. SlowlyturntheDrivePulley(A)backwardandcarefully
ease the Drive Belt (B) off the Drive Pulley to the outside.
Be sure to keep ngers clear of all pinch
hazards as you turn the Drive Pulley.
Disconnect all power to the machine before you service it.
B
B
A
C
E