User Manual

31
Contact your doctor for more information about Body Mass Index (BMI) and the weight that is appropriate
for you. Use the values calculated or measured by the machine’s computer for reference purposes only.
8. Push the Increase(c) button to move to the “SA9E TO USB  OK"” prompt. Push OK and the “ARE YOU SURE"
NO” prompt will display. Push the Increase(c) button to change it to yes and push OK. The Console will display the
“INSERT USB” prompt. Insert a USB Flash Drive into the USB Port. The Console will record the Statistics to the USB
Flash Drive.
The Console will display “SA9ING”, and then “REMO9E USB” when it is safe to remove the USB Flash Drive.
Note: Push the PAUSE/END button to force an e[it from the “SA9ING” prompt.
9. Push the Increase(c) button to move to the “CLEAR WORKOUT DATA OK"” prompt. Push OK, and the “ARE YOU
SURE"  NO” prompt will display. Push the Increase(c) button to change to the “ARE YOU SURE"  YES” display, and
push OK. The user workouts have been reset.
10. Push GOAL TRACK to return to the PowerUp screen.
When a User performs a workout that surpasses the “LONGEST WORKOUT” or “CALORIE RECORD” of the previous
workouts, the Console will congratulate with an audible sound and tell the User the new achievement. The corresponding
Achievement Indicator Light will also be active.
Console Setup Mode
The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric,
control the sound settings ( on/ off), or see maintenance statistics (Error Log and Run Hours ± for service technician use
only).
1. Hold down the PAUSE/END button and Up arrow button together for 3 seconds while in the PowerUp Mode to go
into the Console Setup Mode.
Note: Push PAUSE/END to e[it the Console Setup Mode and return to the PowerUp Mode screen.
2. The Console display shows the Date prompt with the current setting. To change, push the Up/Down arrow buttons to
adjust the currently active value (Àashing). Push the Left/Right buttons to change which segment is the currently ac
tive value (month / day / year).
3. Push OK to set.
4. The Console display shows the Time prompt with the current setting. Push the Up/Down arrow buttons to adjust the
currently active value (Àashing). Push the Left/Right buttons to change which segment is the currently active value
(hour / minute / AM or PM).
5. Push OK to set.
. The Console display shows the Units prompt with the current setting. To change, push OK to start the Units option.
Push the Up/Down arrow buttons to change between “MILES” (Imperial English units) and “KM” (metric units).
Note: If the units change when there is data in User Statistics, the statistics convert to the new units.
7. Push OK to set.
8. The Console display shows the Sound Settings prompt with the current setting. Push the Up/Down arrow buttons to
change between “ON” and “OFF”.
9. Push OK to set.
10. The Console display shows the TOTAL RUN HOURS for the machine.
11. For the ne[t prompt, push the OK button.
12. The Console display shows the Software 9ersion prompt.
13. For the ne[t prompt, push the OK button.
14 . The Console will display the PowerUp Mode screen.
CONSOLE SETUP MODE