Be Strong.
TABLE OF CONTENTS Before You Assemble..................... 3 Product Specifications................... 4 Product Features............................ 4 Parts List / Box Contents.............. 5 Exploded View................................ 6 Hardware and Tool List................. 7 Assembly Guide............................. 8 Warranty Information.................... 15 Important Contact Numbers.........
before you assemble Basic Assembly Principles Here are a few basic tips that will aid in the assembly of the Nautilus® NS75X. By using these principles, you can simplify each process and save yourself extra time and effort. 1. T o make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly instructions for that step prior to starting assembly for the step. 2.
product Specifications NOTE: All instructions in the manual are given with the orientation of sitting on the machine ready to exercise. User Weight Capacity: 300lbs / 136.1Kg Dimensions: 56”w x 76”l x 46”h / 142 cm x 193 cm x 117 cm Shipping Weight: 207 lbs / 93.9 kg Net Weight: 185 lbs / 83.
Parts list / Box Contents # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 38 39 40 41 42 43 44 DESCRIPTION QTY Main Base Assembly ........................ 1 Connecting Tube Assembly ............. 1 Seat Tube Assembly . ........................ 1 Seat Handle......................................... 2 Vertical Pulley Bracket ..................... 1 Cable Retaining Bracket ................... 1 Angled Pulley Bracket ......................
Exploded view 19 20 18 22 17 24 21 7654 4 16 23 9 11 13 3 8 14 1 15 10 12 5 6 2 7 • Compare the Bill of Materials to the box contents to insure that all parts are present before installation begins.
Hardware and tools NS-75 Nautilus NS75X
NS75X Leg Press attachment can be assembled in a right or left configuration for use on the NS300X ,NS200X, NS600X and NS700X. You may also mount the Ab Crunch arm on either side to most efficiently use space.
STEP 1 Assembly NS200X,NS300X & NS600X RIGHT OR LEFT SIDE (OPPOSITE OF WEIGHT STACK) 5 33 33 3/8" x 3"L 3/8" x 3"L LEG PRESS CABLE REMOVE CABLE BRACKET 2 32 3/8" x 3 1/4"L 43 40 NS 700X RIGHT SIDE ONLY 33 3/8" x 3"L LEG PRESS CABLE 2 40 43 Note: If NS75X is attached to NS700X use 3/8” x 3 1/2” Hex Bolt A. Attach the Connecting Tube Assembly (2) to the gym with hardware shown above.
Assembly STEP 2 3/8" x 3 1/4"L 3/8" x 2 3/4"L 32 16 34 4 3 32 33 33 3/8" x 3"L 3/8" x 3 1/4"L 3/8" x 3"L 40 43 2 1 Step 2 Components: # Component Qty 1 Main Base Assembly 1 3 Seat Tube Assembly 1 4 Seat Handle 2 16 Seat Back Support Assembly 1 32 Hex Bolt - 3/8” x 3 1/4”L 6 33 Hex Bolt - 3/8” x 3”L 4 34 Hex Bolt - 3/8” x 2 3/4”L 1 40 3/8” Flat Washer 22 43 3/8” Lock Nut 11 10 Procedure: A.
Assembly STEP 3 29 9 11 38 13 8 39 31 1/2" x 3"L 15 14 42 10 38 3/8" x 3/4"L w/ THREAD LOCK 12 Step 3 Components: # Component 8 Leg Press Top Link 9 Foot Plate Assembly 10 Leg Press Front Link Left 11 Leg Press Front Link Right 12 Leg Press Rear Link Left 13 Leg Press Rear Link Right 14 Leg Press Power Arm 15 Leg Press Power Link 29 Pivot Shaft 31 Hex Bolt - 1/2” x 3”L 38 Button Head Screw 3/8” x 3/4”L w/ Thread Lock 39 1/2” Flat Washer 42 1/2” lock Nut Procedure: Qty 1 1 1 1 1 1 1 1 5 2 15
Assembly STEP 4 20 3/8" x 3"L 33 42 19 39 30 21 18 1/2" x 7"L 40 33 43 3/8" x 3"L 41 28 7 33 3/8" x 3"L Procedure: Step 4 Components: # Component 7 Angled Pulley Bracket 18 Ab Crunch Support Arm 19 Ab Crunch Arm 20 Ab Crunch Handle 21 Ab Crunch Pad Support 28 Round Plastic Cap 30 Hex Bolt - 1/2” x 7”L 33 Hex Bolt - 3/8” x 3”L 39 1/2” Flat Washer 40 3/8” Flat Washer 41 Shim Washer 42 1/2” Lock Nut 43 3/8” Lock Nut 12 Qty 1 1 1 1 1 1 1 6 2 12 1 1 6 A.
Assembly STEP 5 22 17 34 56 7 24 37 3/8" x 1"L 23 37 3/8" x 1"L 40 37 3/8" x 1"L Step 5 Components: # Component 17 Seat Back Adjuster 22 Ab Crunch Pad 23 Seat Pad 24 Seat Back Pad 37 Hex Bolt - 3/8” x 1”L 40 3/8” Flat Washer Procedure: Qty 1 1 1 1 12 12 A. Attach the Ab Crunch Pad (22) to the Ab Crunch Pad Support using the hardware shown above. B. Attach the Seat Back Pad (24) to the Seat Back Adjuster (17) using the hardware shown above.
Assembly STEP 6 37 3/8" x 1"L 43 25 26 34 35 3/8" x 2"L 6 44 34 3/8" x 2 3/4"L 43 NOT USED ON THE NS700X 27 40 3/8" x 2 3/4"L 34 26 27 35 34 35 3/8" x 2"L 3/8" x 2"L 25 Step 6 Components: # Component Qty 25 Leg Press Cable w/ Termination 1 26 3 1/2” Pulley 4 27 4 1/2” Pulley 3 34 Hex Bolt - 3/8” x 2 3/4”L 4 35 Hex Bolt - 3/8” x 2”L 3 37 Hex Bolt - 3/8” x 1”L 1 40 3/8” Flat Washer 6 43 3/8” Lock Nut 8 44 Step Spacer 8 14 Procedure: A.
WARRANTY INFORMATION What Is Covered Nautilus Fitness Products warrants to the original purchaser of this Nautilus Home Gym to be free from defects in materials or workmanship, with the exceptions stated below. This warranty is not transferable or applicable to any person other than the original purchaser. Nautilus Home Gyms The frame and welds of the Nautilus Home Gyms are warrantied to the original purchaser for life from date of original purchaser.
IMPORTANT CONTACT NUMBERS If you need assistance, please have both the serial number of your machine and the date of purchase available when you contact the appropriate Nautilus office listed below. WORLDWIDE CUSTOMER SERVICE INTERNATIONAL CUSTOMER SERVICE • NORTH AMERICA OFFICE Nautilus, Inc. World Headquarters 16400 S.E. Nautilus Drive Vancouver, Washington, USA 98683 Phone: 800-NAUTILUS (628-8458) Fax: 800-686-6466 e-mail: cstech@nautilus.com • INTERNATIONAL OFFICE Nautilus International S.A.
Be Strong.™ For more information about our Nautilus NS75X Leg Press or other Nautilus ® equipment for your home, visit www.Nautilus.com. © 2006 Nautilus, Inc. All rights reserved. Nautilus, the Nautilus logo, My Nautilus, Heart Strong, Changing the Game in Health and Fitness, REACT, ROC, Remote Operation Control, SuperSoft, Hyperdrive, Be Strong are either registered trademarks or trademarks of Nautilus, Inc. Nautilus, Inc.
