Operation Manual

Bluetooth

Connectivity with the “Nautilus Trainer™” Fitness App

ThistnessmachineisequippedwithBluetooth

connectivity and can wirelessly sync with the “Nautilus Trainer™”

FitnessApponsupporteddevices.TheSoftwareAppsyncswithyourtnessmachinetotracktotalcaloriesburned,time,

distance, and more. It records and stores every workout for quick reference. Plus, it automatically syncs your workout data

with MyFitnessPal

, and Under Armour

Connected Fitness to make hitting your daily calorie goal easier than ever! Track

your results and share with friends and family.

1. Download the free Software App, named Nautilus Trainer™. The software app is available on iTunes

and Google

Play™.

Note: For a complete list of supported devices, review the software app on iTunes

or Google Play™.

2. FollowtheinstructionsontheSoftwareApptosyncyourdevicetoyourexercisemachine.

3. To sync your workout data with MyFitnessPal

or Under Armour

Connected Fitness, click on the desired program

and login with your information.

Note: The “Nautilus Trainer™” Fitness App will automatically sync your workouts after the initial syncing.

USB Charging

If a USB Device is attached to the USB Port, the Port will attempt to charge the Device. The power supplied from the USB

Port may not be enough to operate the Device and charge it at the same time.

Remote Heart Rate Monitor

MonitoringyourHeartRateisoneofthebestprocedurestocontroltheintensityofyourexercise.ContactHeartRate

(CHR) sensors are installed to send your heart rate signals to the Console. The Console can also read telemetry HR

signals from a Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.

Note: The heart rate chest strap must be an uncoded heart rate strap from Polar Electro or an uncoded POLAR®

compatible model. (Coded POLAR® heart rate straps such as POLAR®

OwnCode® chest straps will not work with this equipment.)

If you have a pacemaker or other implanted electronic device,

consult your doctor before using a wireless chest strap or other

telemetric heart rate monitor.

NOTICE: To prevent interference with the telemetry HR receiver, do not

place any personal electronic devices in the left side of the media

tray.*

Contact Heart Rate Sensors

Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel

parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the

topandthebottomofthesensors.Holdrm,butnottootightorloose.Bothhandsmustmakecontactwiththesensorsfor

the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.

Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now

validatetheheartrate.Manyfactorsinuencetheabilityofthesensorstodetectyourheartratesignal:

• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere

with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.

• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.