Operation Manual

7
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum76”x120”(193cmx305cm).Besurethattheworkoutspace
youareutilizinghasadequateheightclearance,takingintoconsiderationtheheightoftheuserandthemaximumincline
of the elliptical machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
Maximum User Weight: 300 lbs. (136 kg)
Maximum Pedal Height - with full incline: 24” ( 61 cm)
Machine Weight:  173.3lbs.(78.6kg)
Power Requirements:
Operational Voltage: 120V AC
Operating Current: 2 A
This product, its packaging, and components contain chemicals known to the State of California to cause
cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposi-
tion 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65.
63.2”
(160.5 cm)
71.5”
(181.7 cm)
26.7”
(67.7 cm)