Operation Manual

Condition/Problem Things to Check Solution

Check magnet position

(requires shroud removal)

Magnet should be in place on pulley.

Check Speed Sensor

(requires shroud removal)

Speed sensor should be aligned with magnet and connected to

data cable. Realign sensor if necessary. Replace if there is any

damage to the sensor or the connecting wire.

Fan will not turn on or will

not turn off

Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Reset machine Unplug unit from electrical outlet for 3 minutes. Reconnect to

outlet.

Fan will not turn on, but

Console operates

Check for blockage of fan Unplugunitfromelectricaloutletfor5minutes.Removemate-

rial from fan. If necessary, detach the Console to help with

removal. Replace the Console if unable to remove blockage.

Unit rocks/does not sit

level

Check leveler adjustment Adjust levelers until machine is level.

Check surface under unit Adjustmentmaynotbeabletocompensateforextremelyun-

even surfaces. Move machine to level area.

Pedalsloose/unitdifcult

to pedal

Check pedal to crank

connection

Pedal should be tightened securely to crank. Be sure connec-

tion is not cross threaded.

Clicking sound when

pedaling

Check pedal to crank arm

connection

Remove pedals. Make sure there is no debris on threads, and

reinstall the pedals.

Seat Assembly shifts /

squeaks when in use

Hardware Check hardware that attaches Seat assembly, and fully tighten

hardware.