Operation Manual

10
3. Install Handlebars on Console Mast
NOTICE: Do not crimp the cables. Put the Handlebar (7) in the bracket (5a), adjust the Handlebar to the desired angle,
andinstalltheT-handle(D)throughtheholes.UsethepullcableintheHandlebarMounttoroutetheHRcable
(7a)throughtheslot(5b)undertheHandlebarMounttothetopofthemast.FullytightentheT-handletokeep
theHandlebarinposition.Pushthecover(6)intopositionontheHandlebarMount.
5a
D
E
B
7
D
E
B
7a
7
6
5a
D
7a
7
5b