Operation Manual

31
Contact your doctor for more information about Body Mass Index (BMI) and the weight that is appropriate
for you. Use the values calculated or measured by the machine’s computer for reference purposes only.
8. Push the Increase() buttontomovetothe“SAVETOUSB-OK?”prompt.PushOKandthe“AREYOUSURE?
-NO”promptwilldisplay.Pushthe Increase() button to change it to yes and push OK. The Console will display the
“INSERT USB” prompt. Insert a USB Flash Drive into the USB Port. The Console will record the Statistics to the USB
Flash Drive.
TheConsolewilldisplay“SAVING”,andthen“REMOVEUSB”whenitissafetoremovetheUSBFlashDrive.
Note:PushthePAUSE/ENDbuttontoforceanexitfromthe“SAVING”prompt.
9. Push the Increase() buttontomovetothe“CLEARWORKOUTDATA-OK?”prompt.PushOK,andthe“AREYOU
SURE?-NO”promptwilldisplay.PushtheIncrease() button to change to the “AREYOUSURE?-YES”display,and
push OK. The user workouts have been reset.
10. PushGOALTRACKtoreturntothePower-Upscreen.
When a User performs a workout that surpasses the “LONGEST WORKOUT” or “CALORIE RECORD” of the previous
workouts, the Console will congratulate with an audible sound and tell the User the new achievement. The corresponding
Achievement Indicator Light will also be active.
Console Setup Mode
The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric, control
thesoundsettings(on/off),orseemaintenancestatistics(ErrorLogandRunHours–forservicetechnicianuseonly).
1. TogointotheConsoleSetupMode:
 -Forthelaterversionoftheconsole,holddownthePAUSE/ENDbuttonandIncreasebuttontogetherfor3seconds
whileinthePower-UpMode.
 -Fortheearlierversionoftheconsole,holddownthePAUSE/ENDbuttonandLeftbuttontogetherfor3seconds
whileinthePower-UpMode.
Note:PushPAUSE/ENDtoexittheConsoleSetupModeandreturntothePower-UpModescreen.
2. The Console display shows the Date prompt with the current setting. To change, the Increase/Decrease buttons to
adjustthecurrentlyactivevalue(ashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrently
active value (month / day / year).
3. Push OK to set.
4. The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust
thecurrentlyactivevalue(ashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrentlyactivevalue
(hour / minute / AM or PM).
5. Push OK to set.
6. TheConsoledisplayshowstheUnitspromptwiththecurrentsetting.Tochange,pushOKtostarttheUnitsoption.
Push the Increase/Decrease buttons to change between “MILES” (Imperial English units) and “KM” (metric units).
Note: If the units change when there is data in User Statistics, the statistics convert to the new units.
7. Push OK to set.
8. The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons
to change between “ON” and “OFF”.
9. Push OK to set.
10. The Console display shows the TOTAL RUN HOURS for the machine.
11. Forthenextprompt,pushtheOKbutton.
12. TheConsoledisplayshowstheSoftwareVersionprompt.
13. Forthenextprompt,pushtheOKbutton.
14.TheConsolewilldisplaythePower-UpModescreen.
CONSOLE SETUP MODE