Installation Manual GMC Yukon 2012-2014 Must be equipped with factory rear view camera Interface with HDMI Input Part #: NAVTOOL6.0-AR2-HDMI NOTICE: Navtool recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
WELCOME Table of Contents IMPORTANT WARNING Installation Instructions This product includes instructions for installation, which must be carefully followed. The instructions are worded in such a manner to assume that the installer is capable of completing these types of electronic installations. Suppose you are unclear about what you are instructed to do or believe you do not understand the instructions to complete the installation properly and safely.
Precautions PLEASE READ BEFORE YOU START THE INSTALLATION • Please study these instructions carefully before installing NavTool interface. • Many new vehicles use low-voltage or data-bus systems that can be damaged by test lights and logic probes. Test all circuits with a digital multi-meter before making connections. • Do not disconnect the battery if the vehicle has an anti-theft-coded radio, unless you have the radio code.
What’s In The Box? NavTool Interface (Part # NAVTOOL6.
Interface Connectors Description Not Used Main Connector for Universal Interface Harness Configuration Port NavTool Interface (Part # NAVTOOL6.0-AR2-NBT) Data LED HDMI Port HDMI LED Power LED Main Connector for Universal Interface Harness- This port is dedicated for a connection of a universal wiring harness. Configuration Port- This USB port is dedicated for the interface configuration only. Data LED- Normal operation of the interface must have blue LED blinking.
Universal Harness Description Rear Camera Input/ Video Input 1 Front Camera Input/ Video Input 2 Left Camera Input/ Video Input 3 Right Camera Input/ Video Input 4 NavTool Interface Harness (Part # NT-WHNT6) Right Audio Output Left Audio Output Connector for Vehicle Specific Harness Connector for(Not Controller Used) Connector for Microphone Input (Not Used) +12V Manual Activation Input +12V Output Rear Camera Input /Video Input 1- This input is dedicated for an aftermarket rearview camera or a video s
Quick Connection Guide NavTool Interface (Part # NAVTOOL6.
Installation Instructions STEP 1 NO APPLICATION OR SOFTWARE DOWNLOAD IS REQUIRED TO CONFIGURE THE INTERFACE. To configure the interface, you must use Windows, Mac, or Google computer. Windows computers must use the latest version of Google Chrome or Microsoft Edge browser. Mac computers must use the latest version of the Google Chrome browser. Google computers must use the latest version of the Google Chrome browser. TO CONFIGURE THE INTERFACE, GO TO HTTPS://CONFIG.NAVTOOL.
Installation Instructions STEP 2 Continued Step 1: Step 2: • Use a flat-bladed plastic trim tool in order to release the retainer clips securing the trim plate to the instrument panel. • Retainer Clips (Qty: 9) 1/7/22, 5:22 PM Step 3: Image ID# : 1673759 • Instrument Panel Accessory Switch Screw (Qty: 2) • Disconnect the electrical connections. 1/7/22, 5:25 PM Image ID# : 1689885 Step 4: Image ID# : 1682696 https://gsitlc.ext.gm.com/gsi/showSvg.
Installation Instructions STEP 3 Step 1: Connect supplied plug and play harness (Part # NT-GMQUAD1) to the back of the radio. Continued on Step 4 Click Click Back View of Car Navigation Vehicle Specific Plug and Play Harness (Part # NT-GMQUAD1) Click Click Factory Radio Harness (For complete image, see Quick Connection Guide on page 7) Step 2: Reconnect previously removed radio connectors into the back of the radio.
Installation Instructions STEP 5 Left Audio Output Right Audio Output (Part # NT-WHNT6) (Not Used) • Connect audio output on the universal wiring harness (Part # NT-WHNT6) RCA plugs into the vehicle’s AUX input using appropriate cables. See quick connection guide on page 7. • Connect Push Button wires. Connect red wire to white wire and isolate with electrical tape. Connect black wire to green wire and isolate with eletrical tape.
Installation Instructions STEP 6 Plug in main interface (Part # NAVTOOL6.0-AR2-HDMI) into the universal wiring harness (Part # NT-WHNT6). See quick connection guide on page 7. NavTool Interface (Part # NAVTOOL6.
Testing and Settings STEP 1 • Start the car, observe NavTool LED lights should be one blinking blue and two steady lit green LED lights. Data LED HDMI LED Power LED • At this time, your car radio should boot up into its initial state, and the radio should be working. Please check that the radio operates appropriately. All radio functions are working, including CD, Satellite Radio, AM/FM radio, audio plays from car speakers, and all other radio features.
Testing and Settings STEP 4 • Test HDMI input if you are connecting any HDMI video source. • Press and hold supplied push button for 3-5 seconds. The interface will activate on the screen. • Single press of the push button will cycle through the available video inputs. • Press the push button until HDMI input is highlighted and you will enter the HDMI mode. • Video signal from your HDMI source will appear on the screen.
Vehicle Reassembly Checklist When performing vehicle reassembly, please make sure to go over the list and checkoff check mark boxes: Check to see if all connectors behind the screen, radio, HVAC etc. were reconnected. Check that LCD screen shuts off with the key off, and turns back on with the key on. Check touchscreen operation. Check Heat and AC controls operation. Check AM/FM/SAT radio reception. Check CD player/changer operation. Check GPS signal reception.
How to Connect Rear Screens to Car With AV Input Car Monitor NavTool Interface HDMI to AV Adaptor 1 in 2 Out HDMI Splitter HDMI Sources GMC Yukon 2012-2014 16
How to Connect Rear Screens to Car With HDMI Input Car Monitor NavTool Interface Car HDMI Input 1 in 2 Out HDMI Splitter HDMI Sources GMC Yukon 2012-2014 17
User Manual For Consumer Thank you for purchasing NavTool. If you have any questions, please call toll-free at 877-628-8665. The color/navigation screen will display a factory image when you first start your vehicle. • Set the radio to AUX input to hear the HDMI audio. See page C2 for details. Fig. 1 Aftermarket Rear Camera Not Equipped HDMI Aftermarket Left Camera Aftermarket Front Camera Not Equipped Aftermarket Right Camera • Press and hold supplied push button for 3-5 seconds.
Setting Radio to Auxiliary AUX Input Set Radio to AUX Audio Input: • SRCE Button: Press the SRCE button to display the audio screen. Press to switch between AM, FM, or XM, if equipped, Disc, or AUX (Auxiliary). Must set a radio to auxiliary/AUX before activating NavTool to hear audio from car speakers. See page 11 step 6 for AUX connection. • Audio will not play through car speakers if AUX input is not connected or radio is not set to AUX input.