Installation Manual

Page 10
Installation
On GT / SPUR
there are only
certain locations
where you can put
the DAB antenna
as the glass in the
car is polarised
and will affect
reception. Top of
the front screen is
not polarised.
To remove the
roof console you
will require a right
angled pick.
Gently pry the
OEM mic and
alarm sensor out
of the consol and
remove the 2 x t20
torx screws
behind, then pull
down console.
Once you have
completed all the
above, refit the
trim panel and
test to ensure all
functions.
Non-US vehicles
only:
NOTE: to adjust
factory clock post
install, the vehicle
must be RUNNING.