Owner's Manual

TY
12/28/21
NTV-DOC314C
2 | P a g e
ZEN-V Compatibility
The NAV-TV ZEN-V processor seamlessly converts late model AUDI, VW, Porsche & Bentley factory MOST-150
audio bus to 12-channel analog RCA and TOSLink output. Adding aftermarket amplifiers to the OE MIB, MIB2,
MIB2.5, MIB3 or PCM4, PCM4.1, PCM5.0 and PCM6 system has never been so simple. This kit integrates with
the OEM M.O.S.T.® bus to retain volume control, full fade (analog only) and balance, treble, mid-range, bass
control & Bluetooth voice calls with no external speaker (true OEM integration). NOTE: OEM radio systems not
equipped with an amplifier or fiber must be flashed with the VAG-COMM or NAV-TV’s ZEN-V-PRG (NTV-KIT861,
sold separately) prior to installation. Vehicles equipped with an OEM amplifier do not need to be flashed.
Cars with the MIB3 system require our OBD programmer, regardless of whether they have an Amp or not.
ZEN-V overview
(MIB, MIB2, MIB2.5
MIB3 or PCM4, 4.1,
5.0 or 6 radio only)
Kit Content
Year(s)
Make
Model
2015+
AUDI
Any model with confirmed MIB, MIB2, MIB3 or MIB HS (A3, TT, etc.)
2017+
AUDI
A3, A4, A5, A6, A7, A8, Q5, Q7, S3, S4, S5, S6, S7, S8, SQ5, TT , e-tron
2017+
Porsche
911, Boxster, Cayenne, Cayman, Macan, Panamera
2017+
Bentley
Bentayga
2016+
VW
ANY model with MIB, MIB2, MIB3 or MIB-HS
Power
connector
USB (updates)
TOSLink output
MOST 150 fiber input
--FUTURE USE--
Analog RCA outputs
WARNING: Do not connect any RCA cables to the ZEN-V interface or
additional processors prior to properly grounding aftermarket amplifier(s)!
DIP switches
Status LED
--FUTURE USE--
Overview
ZEN MOST Fiber
NTV-CAB134
USB Cable (updates)
NTV-CAB009
ZEN Power Harness
NTV-HAR316
ZEN RCA Harness
NTV-HAR315
ZEN-V Interface
NTV-ASY272
ZEN MIB3
Programmer
NTV-KIT996