Owner's Manual

Dual
XGPS160
Setup
The XGPS160 is very simple to use. There is a
one-time setup process to connect it to your iPad,
iPod, smart phone, tablet or laptop computer.
Once this setup process
is completed, simply turn
on the XGPS160 to begin using
it.
To setup the XGPS160 with your device, you will
need to do two things:
·Power on the XGPS160.
• Pair the XGPS160 with the device you will
be
.
USing.
Pairing with your device
Pairing is the process connecting two devices over
Bluetooth and allowing them to communicate.
You
will need to go through the pairing process each
time you use the XGPS 160 with a new device, and
the XGPS 160 will automatically try to reconnect to
the last device it was paired with.
NOTE: If your device requires a code to connect
during the pairing process, use "0000" or "1234".
Pairing the XGPS160 with the iPod touch, iPad
or iPhone
(NOTE: these instructions were written using iOS
version
6.1 and may be different if you are using a
different version
of the iPhone OS.)
6