Owner's Manual

Dual
XGPS160
(NOTE: these instructions were written using An-
droid OS
version 3.2 and may be different if you
are using a different version of the Android
OS.)
8
•
Turn
on
the XGPS160.
The blue Bluetooth
status light
on the XGPS 160
will
begin to blink
slowly
(about once per second).
·On
the Android device go to:
Settings->
Applications->
Development
and
enable
the option for
Allow
mock
loca-
tions.
This will let
the Android device use
GPS
information from an
external
device
like
the
XGPS160.
• On
the Android device go to:
Settings->Wireless
&
networks
and turn on
Bluetooth.
• On
the Android device go
to
Settings->Wireless
&
networks->
Bluetooth
settings
and
select
Scan
for
devices.
•
After a few seconds, the word
XGPS160-
xxxxxx
will appear
in
the
list
of
devices. (Note:
the
last 6 digits are part of the
XGPS 160 serial
number and
will vary from device to device.) At
this point, the Android device may say
Paired
but
not
connected
and the blue Bluetooth
indicator XGPS160
will continue to blink slowly.