Installation Manual

ManualsBrandsNavePoint ManualsDesk Accessories & Workspace OrganizersNavePoint Triple LCD Monitor Desk Stand/Mount Free Standing Adjustable 3 Screens upto 24-Inches Black

Assembly Instructions

www.NavePoint.com

Customerservice@navepoint.com

Thank you for purchasing a NavePoint product. If you have any questions regarding the installation or

use of your product, please call us at 888.505.1363.

Please examine the product for any damaged parts. If any part is damaged or missing, contact Nave-

Point for assistance. Do not attempt to install or use product if it has been damaged.

During installation, lay product contents on cardboard or other protective surface to avoid any damage.

Improper installation of this product could result in damage to the product, other equipment, or

personal injury. It is recommended that installation be performed by a qualiﬁed installer. NavePoint

cannot be held responsible for damage to equipment or personal injury resulting from improper use or

installation of product.

Limitations of Liability: In no event will NavePoint, LLC. be liable for any damages, whether direct or

indirect, special, punitive, incidental or consequential damages (including, but not limited to, lost proﬁts

or revenue, loss of use, lost business opportunities or loss of goodwill) or for the costs of procuring

substitute products, arising out of or in connection with the use of the product, whether such liability

arises from any claim based upon contract, warranty, tort (including negligence), product liability or

otherwise, whether or not seller has been advised of the possibility of such loss or damage. In no

event will seller’s total cumulative liability, from all causes of action and all theories of liability, exceed

the total amounts actually paid to seller by customer under the order that gives rise to any liability

hereunder.

Summary of content (5 pages)

PAGE 1
www.NavePoint.com Customerservice@navepoint.com Assembly Instructions Thank you for purchasing a NavePoint product. If you have any questions regarding the installation or use of your product, please call us at 888.505.1363. Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for assistance. Do not attempt to install or use product if it has been damaged.
PAGE 2
Supplied Parts (1) 48mm Pole-a (1) Weighted Base-b (1) Monitor Arm-c (1) Plastic Cover-d (1)M10 Bolt-e (1)Support Plate-f (1)M10 Washer-g (1)Spring Washer-h (2)M8x10 Bolt-i (3)M6x29 Bolt-j (1)Allen Key-k (1)Wrench-l (12)M4x12 Thumb Bolt-m (12)M4x30 Bolt-n (12)M4 Space-o (2)Spare Cover-p Tools Required www.NavePoint.com Phillips Screwdriver 2 customerservice@navepoint.
PAGE 3
S tep1 Mounting the base according to your requirement The stand can be used with the weighted metal base or there is a desk attachment provided (as drawings on the bottom) allowing you to mount the stand on a desk. This is very simple to install and just requires a hole (10mm diameter) in your desk and clamping with the bolt and large washer. Option1 a d j b Option2 Option3 a a d d j b g h www.NavePoint.com f f g h e 3 e customerservice@navepoint.
PAGE 4
S tep2 Install Monitor Arm to the Pole Install monitor arm to the pole, please make sure the wire clips are facing downwards. Fasten the M8x10 bolts (i) with screw driver. c i S tep3 Wire Clip Mount the Monitor to VESA Plate o n m For Flat Back Monitor www.NavePoint.com For Curved Back Monitor 4 customerservice@navepoint.
PAGE 5
S tep4 Do the Necessary Adjustment Level Adjustment k k l Use the Allen Key(k) to adjust the turning tension. Use the Wrench(l) to tighten the nut if the tilt angle need, adjustments. S tep6 Turn the bolt counterclockwise to lower the center monitor, turn the bolt clockwise to raise the center monitor. Manage the Wires www.NavePoint.com 5 customerservice@navepoint.