Installation Manual

Step 3 – Install the Vertical Mounting Rails (#10)
Install the Vertical Mounting Rails (#10) to the Horizontal Beams at the desired depth using the Cage Nut Kit
provided (Bag A). When determining the appropriate depth, be sure to consider the equipment that you plan
to mount inside the enclosure. (This may include the provided L Brackets).
1
2
3
4
5
6
1
2
3
4
5
6
Note: Be sure that the rail depth is the same on both sides of the cabinet. Pay attention to the numerical unit
markings on the rails to be sure they are right side up.
Page 4