User's Manual

22 |
Wiring |Halo pulse compression radar installation manual
Remote power control
Remote power control is a feature that allows the power state of the radar to be controlled
either from a switch or when a compatible multifunction display is powered on or o .
 Note: The power control jumper must be moved from AUTO to REMOTE for the radar to use
the remote power on function.
 Note: +V DC (5 V DC - 32 V DC) from either a multifunction display set as power control mas-
ter or a switch can be applied to the REMOTE port of the AUX IN connector for the remote
power on to function.
Connect the yellow wire to external wake up of a compatible multifunction display to the
remote input. The radar will turn on when the display is turned on. The display must be set to
‘Master’ under Power Control. (Please refer to the displays user manual)
+
_
4
5
33
2
1
TRANSDUCER 1
POWER
SPEED
TEMPERATURE 1 TEMPERATURE 2
TRANSDUCER 2
Key Description
1
Halo® RI-12 Interface module
2
NSO evo2 or other multifunction display (one or more multifunction display needs
to be set to power control master)
3
Other Simrad device with remote power control
4
Power control bus
5
DC Power
Draft_08_April_2015