User's Manual

| 1
Contents | Halo pulse compression radar installation manual
Contents
3 Introduction
4 Check the parts
4 Pedestal
5 Antenna
5 RI-12 Radar interface module
6 Tools required
7 Installation Guidelines
8 Compass safe distance
8 Multi-radar installations
8 Power boat installations
9 Considerations for direct roof mounting
10 Hardware mounting
10 Install the RI-12 radar Interface module
11 Mount the pedestal
15 Fitting the antenna to the pedestal
16 Wiring
17 RI-12 connections
18 LED Indicator lights
18 Pedestal Interconnection cable
21 Grounding requirements
22 Remote power control
23 Network
24 NMEA2000
25 NMEA 0183
25 RI-12 heading source selection:
25 Antenna park
26 Setup and con guration
26 Entering radar setup on your display
26 Select the antenna length
27 Adjust antenna height...
27 Adjust bearing alignment...
28 Sector blanking
28 Adjust open array park angle
28 Sidelobe suppression...
29 Radar Status
29 Reset Radar to factory defaults
30 Control pedestal accent lighting
31 Speci cations
33 Drawings
33 RI-12
34 Pedestal and antennas
36 Spare Parts
37 Service parts
39 Third party mounting options
40 Trouble shooting
Draft_08_April_2015