User's Manual

10
B.11 Setup MENU
To activate the setup menu, press and hold the Hi/Lo/MENU key over 3 sec.
The detail setup menu operation, refer to the MENU operation paragraph.
B.12 DISTRESS
Under jeopardy condition, Distress call should be transmitted. Press the
DISTRESS key will activate the DISTRESS menu and enable DISTRESS call to
be send out. Detail DISTRESS menu and associated operation refer to the
DISTRESS Operation paragraph.
B.13 Navigation Mode
Short press the NAV key will enter the Navigation Mode, Bearing, Distance and cross
track error from the last select Way Point will display on the screen.
If no WP is set, it will go to WP select page mode.
During Nav Mode:
Up/Down – It will go to WP select page mode.
PTT – return to normal mode and TX.
EXIT – return to normal mode
16/9 – return to normal mode and go to 16/9
NAV – go to Plotter mode
GO – Reset the cross track error (XTE)
Other key – error beep
B.14 WP Select Mode
The screen is divided into two part, the left is the pointed WP information. The right is
the selection Menu.
During WP Select Mode:
Up/Down – Select the WP.
Enter – Choose the current WP and return to Navigation Mode.
Other key – Return toe Navigation Mode and act same as Navigation Mode.
>FISHY
10’23.2323N
123’12,5446W