User's Manual

26 |
Getting started | RS90 Operating Manual
Entering data
Entering data with a wired handset
Enter data using the keypad. The first press of a key inputs the
number corresponding to the key; subsequent presses input letters
of the alphabet as indicated on the key. For example, 2, A, B, and
C are typed using the same key, in a similar way to using a mobile
phone keypad.
After a short pause, the cursor automatically jumps to the
next space; or, you can press [OK] to move to the next space
immediately.
¼ Note: the keypad only types uppercase letters, although the labels
on the keys are lower case.
To replace a character:
• Use the ◄ and ►keys to arrive at the character. You can then type
over the character.
To nish entering data:
Press [OK] repeatedly to reach the end of the line. The cursor will
then move to the next input required, or a save/cancel option will
be displayed.
¼ Note: You can press [X] at any time to go back one step.
Entering data with a wireless handset
Use the ▲and ▼keys to arrive at the character you want to enter,
and then press [OK].
Warning messages
See “Appendix 6 - Warning Messages” on page 102.
Alert tones
See “Appendix 5 - Beep tones and call alerts” on page 102.
Draft v5.0
27 Feb 2014