User's Manual

36 |
Operating procedures | RS90 Operating Manual
Using the voice recorder
When activated, the voice recorder function records all received and
transmitted voice communications.
If memory is full, it will overwrite previous recordings.
Recording
Long press the voice recorder key to access the recording menu.
Select RECORDER and then ON’ to enable the recording function.
Playback
Press the voice recorder key to play the recording. A playback icon
will be displayed on lower right of the screen. During playback,
select ‘FWD 5S’ from the menu to fast forward 5 seconds.
When finished playing back, the radio will return to standby mode.
Sharing NMEA 2000 data
NMEA 2000 (N2K) is a communications network standard used for
connecting marine electronic devices. It is the successor to NMEA
0183.
¼ Note: The RS90 also supports NMEA 0183.
Various devices can be connected via a network cable and can share
data on the network. This allows the devices to work together and,
for example, one display unit can show information from different
sources.
The RS90 uses N2K to share the following data:
• Waypoint data to a chart plotter. See “Sending waypoint data to a
chart plotter” on page 40.
• AIS
• Display navigation data received from other devices: Depth, speed,
course, heading and wind data.
MENU SELECT
WAYPOINT
N2K DATA
BACKLIGHT
BUDDY LIST
USA
16
Hi
DSC
PRI
NMEA2000
DEPTH
XXXX
SPEED
XXX
USA
16
Hi
DSC
PRI
Draft v5.0
27 Feb 2014