User's Manual

AIS Class B Transceiver

Press ◄ to clear this window and continue. If you have not previously

configured the unit, a new Information window appears asking if you

wish to configure the AI50 for full operation now. The default value is

“Yes” as shown in Fig. 4.3.

If you wish to configure your AI50 now, press  MENU to continue go to

section 4.3.1. Use the ▲▼ keys to change the value to “No”, then press 

MENU to confirm.

If you select “No” the following message will be displayed Fig. 4.4.

Pressing ◄ will return you to the Display Mode as shown in section 6.1

Fig. 4.2 - Start Up Screen

Fig. 4.3 - Conﬁ guration request

Fig. 4.4 – Conﬁ guration warning