User's Manual

Initial Configuration

Press the ◄ key, the display will change to the “Vessel Configuration

Information” window (Section 4.3.2), to enter the remaining ships

configuration information.

If the two entered MMSI numbers do not match, a message indicating this

will be shown Fig 4.8.

Press the ◄ key, the display will revert back to the Configuration Request

window Fig. 4.3.

If you need to cancel the input mode, highlight the CANCEL button and

press  MENU. A warning will be shown in the display Fig. 4.9.

Press the ◄ key, and the display will revert back to the Configuration

Request window Fig. 4.3.

Once the MMSI number has been entered and confirmed, the next stage

of the configuration is highlighted. The MMSI number is now shown as

greyed-out and locked into the system memory; no further changes can be

made to it except by an authorised agent. Fig. 4.10.

4.3.2 Vessel Type Entry

Press  MENU or ► to select “ Vessel type”, “Not Set” will be

highlighted. Fig. 4.11.

Fig. 4.8 - MMSI mismatch warning

Fig. 4.9 - MMSI cancelled warning

Fig. 4.10 – Vessel conﬁ guration list