User's Manual

Initial Configuration
27
Enter the required dimensions of your vessel (in metres), with reference
to the GPS antenna, using the same method of entry as described during
MMSI entry. As you enter each dimension the cursor will advance to the
next one until all have been entered. Select "OK" and press  MENU
to accept your entry. The display returns to the vessel configuration
Information window.
If you have entered an incorrect number in error, highlight either the "Í" or
"Î" and pressing the  MENU key until the cursor is on the error position.
Now using the ▲▼◄► keys, highlight the correct number and press the
 MENU to select it. Once you entry is complete highlight “OK” and
press  MENU to accept.
4.3.4 Call Sign Entry
Using the ▲▼ keys highlight “Call Sign”, and press  MENU or ► to
select it. A window opens as shown in Fig. 4.14.
Enter the Call Sign of your vessel using the same method of entry as
described during MMSI entry. When complete highlight the OK button
and press  MENU to store it in the system memory.
If you have made an error in your entry, see section 4.3.3 for a description
Fig. 4.14 – Call Sign Entry Screen
Fig. 4.13 - Dimension entry error