Operator's Manual

RD68

E03912

To re-enable an inhibited channel into the scan cycle, repeat

sequence 2 -

Select channel to be enabled

then press and hold Scan

(double beep)

12:55

DSC

T/W

M/S

SSccaann

INT

SSccaann

EEnnaa

Press and

hold

2.12 Memory scan

Like the scan function, memory scan will cycle sequentially

through the channels, but only those which have been pre-

selected (refer to the next subsection 2.12.1 for more information

on preselecting memory scan channels).

12:55

DSC

T/W

MM//SS

Scan

INT

Lite

12:56

DSC

Adv

Del

INT

Lite

MM//SS

Press Adv to manually

advance to the next channel in

the memory scan sequence

NOTE While in memory scan mode, normal VHF functions are not

available. To exit memory scan mode, press C or 16.