Car GPS Receiver User's Manual

User’s Manual NAVIGON 2100 | 2110 max
- 22 - Navigation
Each time you switch on the navigation device after this, GPS reception
will start within a short time.
If the navigation device has not been switched on for more than a week,
it can take up to 10 minutes to re-initialise the receiver.
In the top right hand corner of the display, you will see the GPS
icon. As
soon as data from at least three satellites is received, the icon will
change to
(GPS Ready).
Note: Initialisation takes the least time if you do not start driving until
the initialisation has finished.
For more details about the GPS
icon refer to chapter "GPS" on
page 17.
Returning to the Navigation window
The NAVIGATION window opens when the navigation application is
started.
If another window of the navigation application is open, tap on
(Back
). This will return you to the window you came from.
► Tap on (Back) repeatedly until the NAVIGATION window is
opened.
6.2 Specifying a destination
Under New Destination you can enter destinations to which you have
not yet navigated or which you have not saved.
Here you can enter an address, select a special destination, or select a
destination from the quick search function.
Note: The first time that you want to enter a new destination you will be
asked to select the country in which your destination is situated.
Under My Destinations the NAVIGON 2100 | 2110 max provides the
following lists of destinations and addresses for you to select from:
► LAST DESTINATIONS: destinations to which you have navigated on a
previous occasion.
► FAVOURITES: all destinations that you have saved in the
NAVIGON 2100 | 2110 max.
► CONTACTS: all destinations which you have imported from Microsoft
Outlook.