Car GPS Receiver User's Guide

Getting Started
Installing the Car Mount
14 NAVIGON 2100 max | 2120 max User’s Guide December 2008
NAVIGON, INC. Version 2.1
Powering the navigation device
Included with the NAVIGON 2100 max | 2120 max is a car charger cable with which
power can be supplied to the navigation device using the vehicle's cigarette lighter.
The car charger cable is connected to the NAVIGON 2100 max | 2120 max using the
power connection port (Power) on the bottom of the device.
Connecting an Optional GPS Antenna (Not Included)
With the NAVIGON 2100 max | 2120 max, you can also use an external GPS
antenna (not provided with the device).
1. Connect the GPS antenna to the external antenna/headset socket (GPS
antenna) on the NAVIGON 2100 max | 2120 max.
2. Secure the antenna to the mounting surface using the suction cups.
Using the Screensaver
In the MAIN WINDOW:
1. Tap Options > Settings > General.
The G
ENERAL OPTIONS PAGE 1 displays.
2. On P
AGE 3, in the Screensaver field, tap Yes.
3. Tap OK to save the change.
Selecting Day/Night Viewing Mode
In the MAIN WINDOW:
1. Tap Options > Settings > General.
On G
ENERAL PAGE ONE:
2. In the Display mode field, set the viewing mode. Options are:
Automatic Automatically switch between day and night display, based on
sunrise and sunset times.
Night Display with darker colors for night viewing.
Day Display normally for daytime use.
3. When finished, tap OK to return to P
AGE ONE.
4. Tap OK to save changes.
Caution!
The car charger cable is to be connected to cigarette lighters with an operat-
ing voltage of 12V only.
Note: When enabled, the screensaver displays a slide show of pictures when you have
not touched the device after an extended period of inactivity.
Note: The screensaver is automatically disabled during navigation.
Note: The screensaver must be disabled before setting a device password.
Note: Change day and night brightness levels in the Brightness Day and the
Brightness Night fields.