Operation Manual

User’s Manual NAVIGON 21xx max
Pictures - 57 -
Note: You do not need to disconnect the connection manually. The
connection is disconnected automatically when the mobile phone is
moved approximately 10 m from the NAVIGON 2150 max. In this case
the connection data are saved so that the connection can be restored
automatically when the mobile phone is again close enough to the
NAVIGON 2150 max.
1. In the SETTINGS BT window, tap on Connection with Mobile
Phone > Clear Connection Data.
You will be prompted to confirm that you want to disconnect the
connection.
2. Tap on the OK
button.
Note: After the connection is disconnected, the NAVIGON 2150 max
will no longer be able to establish an automatic connection to a mobile
phone (not even to the last connected mobile phone).
The next connection to a mobile phone must be established manually
(refer to chapter "Connection with Mobile Phone" on page 55).
8 Pictures
The NAVIGON 21xx max can show image files which are saved on the
memory card in the navigation device.
Note: If your camera uses SD cards, you can insert the card from the
camera. However, the navigation application will work only if the
memory card with the navigation software and the map data is inserted.
8.1 Suitable files
The picture viewer supports JPG files and PNG files.
8.2 Opening the picture viewer
You can open the picture viewer only from the START window.
► Tap on Pictures.
8.3 Selecting an image file
► In the PICTURES window, tap on Folder.
The C
URRENT FOLDER window opens. The name of the current folder is
indicated at the top. Files and sub-folders are listed underneath. They
are identified as follows: