User's Manual

Working With Maps
Map in Preview mode
March 2008 NAVIGON 21MAX User’s Guide 67
NAVIGON, INC.
Map in Preview mode
You have entered a destination and tapped the Start Navigation button.
- OR –
Create a route or load a saved route, then tap the
Show Route button.
The map opens in
Preview mode. The entire route is visible.
1. The route is highlighted in orange.
2. A triangle in orange shows your current position.
If you display a route and the specified starting point is not the same as your cur-
rent location, the current position may not be shown on the preview.
3. The destination is marked with a small flag.
When you have planned or loaded a route and displayed it, the starting point and
each route point is marked with a small flag.
4. The total distance for the route is shown in a small information box, together with
the estimated trip time and the estimated time of arrival.
This information can be displayed or hidden by tapping on
Options > Settings >
Basic Settings.
If you display a route with several stages, information for each stage is shown.
5. Tap:
• The
Show Turn-by-Turn button to view detailed directions for the route. (See
“Viewing a Turn-by-Turn List” on page 62.)
• The
Start Navigation button to begin the journey.
When you display a planned or loaded route, the route may be recalculated.
Starting point for the calculation is your current location. Once the route is cal-
culated, you are guided to the first route point.
•
Options > Route Profile to view or change settings used to calculate the route.