User’s manual NAVIGON 13xx | 23xx English (United Kingdom) April 2009
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification.
User’s manual NAVIGON 13xx | 23xx Table of contents 1 Introduction .......................................................................................5 1.1 About this manual.....................................................................................5 1.1.1 1.1.2 1.2 Legal notice ..............................................................................................5 1.2.1 1.2.2 1.3 2 Questions about the product ....................................................................
User’s manual NAVIGON 13xx | 23xx 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 5.2.10 5.2.11 5.3 Managing destinations ...........................................................................36 5.3.1 5.3.2 5.4 Entering the starting point..........................................................37 Entering route points .................................................................38 Editing route points....................................................................39 Managing routes .........................
User’s manual NAVIGON 13xx | 23xx 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics: Product names SMALL CAPITALS: Window and dialogue box titles Bold: Highlighting of important parts in the text Underlined: Names of buttons, input boxes and other elements on the user interface Underlined and italics: Names of control elements on the navigation device 1.1.
User’s manual NAVIGON 13xx | 23xx names and company names used in this document are or may be trade marks or registered trademarks of their respective owners. All rights reserved except those explicitly granted. If the registered trade marks used in this manual are not explicitly identified as such, this does not imply that the name is not subject to the rights of a third party. Microsoft, Outlook, Excel and Windows are registered trade marks of the Microsoft Corporation.
User’s manual NAVIGON 13xx | 23xx 2.2 2.3 Description of the NAVIGON 13xx | 23xx 1 Touch-screen (refer also to "Safety information for the navigation device" on page 8) 2 Slot for microSD memory card 3 Mini USB socket for USB cable / car charger cable 4 Reset (refer also to "Troubleshooting" on page 63) 5 On/Off Important safety information In your own interest, please read the following safety information and warnings carefully before starting up your navigation system. 2.3.
User’s manual NAVIGON 13xx | 23xx Caution! Follow the instructions of the navigation system only when the circumstances and the road traffic regulations allow you to do so! The navigation system will still guide you to your destination even if you deviate from the calculated route. Caution! Check that the cradle is secured and adjusted properly before each journey.
User’s manual NAVIGON 13xx | 23xx 2.3.3 Safety guidelines when installing the device in your car Caution! Fasten the cradle so that the navigation device is easy to see and operate by the driver. Make sure that the driver's view of the traffic is not impeded. Caution! Do not attach the cradle within the working zone of any airbags. Caution! Do not fasten the cradle too close to the steering wheel or other controls. The driver must not be obstructed in operating any car functions.
User’s manual NAVIGON 13xx | 23xx Assembling the cradle ► Assemble the cradle as shown in the illustration. No tools are needed for this. Securing the cradle 1. Clean the suction cup and that part of the windscreen to which you want to secure the cradle. Both must be dry and free of dirt and grease. 2. Open the lever on the suction cup as far as possible. 3. Place the cradle suction cup against the windscreen. 4. Press the lever towards the windscreen.
User’s manual NAVIGON 13xx | 23xx Inserting the navigation device into the cradle 1. Hang the navigation device by the upper recess on the upper lug of the cradle. (See illustration) 2. Then press it towards the cradle so that it latches in place. Supplying power to the navigation device Included in delivery of the NAVIGON 13xx | 23xx is a car charger cable with which power can be supplied to the navigation device via the vehicle's cigarette lighter.
User’s manual NAVIGON 13xx | 23xx 2.4.2 TMC antenna (only NAVIGON 23xx) The NAVIGON 23xx has an integrated TMC receiver. The TMC antenna is integrated in the car charger cable. Once the car charger cable is connected, the device can receive current traffic messages. If required, it can change your route dynamically, e.g. in order to avoid a traffic jam. 2.4.
User’s manual NAVIGON 13xx | 23xx Windows XP 1. Tap on Next >. 2. Tap on Finish.
User’s manual NAVIGON 13xx | 23xx Windows Vista ► Tap on Cancel. Windows 2000 1. Tap on Next >.
User’s manual NAVIGON 13xx | 23xx 2. Tap on Next >. 3. Tap on Next >.
User’s manual NAVIGON 13xx | 23xx 4. Tap on Finish. 2.5 Navigating with GPS GPS is based on a total of at least 24 satellites orbiting the Earth and continuously transmitting signals of their position and time. The GPS receiver receives this data and calculates its own geographical position on the basis of the information transmitted by the various satellites. Data from at least three satellites is required for positioning with an acceptable degree of accuracy.
User’s manual NAVIGON 13xx | 23xx (On/Off) key for longer than 2 seconds! If Caution! Do not press the you press the key for longer than 10 seconds, a hardware reset will be carried out. After a hardware reset you must re-calibrate the touchscreen. The GPS receiver will also be re-initialised, which can take up to 20 minutes.
User’s manual NAVIGON 13xx | 23xx 3.1 Options Some windows offer options that lead to more functions. A description of all available options can be found in the chapter "Options" on page 42. 4 Operating the NAVIGON 13xx | 23xx 4.1 Information Various information symbols are located at the top of many windows. GPS The GPS symbol can indicate the following GPS reception states: No GPS (No symbol): The built-in GPS receiver is not operational. Contact customer service if the problem persists.
User’s manual NAVIGON 13xx | 23xx The TMC symbol can display the following TMC reception status: Tuning (in red): The TMC receiver is operational but cannot find a transmitter that is sending TCM signals. There are no active traffic messages. Tuning: The TMC receiver is operational but cannot find a station that is transmitting TMC signals. Traffic messages are active however. This can be the case, for example, when travelling through a tunnel. TMC on Standby (in grey): Traffic messages can be receiverd.
User’s manual NAVIGON 13xx | 23xx 4.2 Software keyboard A software keyboard appears on the screen when text entries are necessary. All entries can be made on the software keyboard using your fingertips. Only capital letters can be entered. When entering town or street names you need not enter any special characters or umlauts. The navigation system fills in these characters for you automatically. For example, if you are looking for the town of "Bärnau", then simply type in the word "BARNAU".
User’s manual NAVIGON 13xx | 23xx Note: Street names and place names can be entered only in the language of the user interface if that is how they exist in the map's database. Note: The maximum number of keyboards is always 2. Umlauts, accents and other letters Another keyboard with special characters is available for each alphabet. opens the keyboard with Latin special characters. opens the keyboard with Cyrillic special characters. opens the keyboard with Greek special characters.
User’s manual NAVIGON 13xx | 23xx Note: The list opens automatically as soon as it contains only 5 or less entries. 4.3 Options Some windows offer options that lead to more functions. A description of all available options can be found in the chapter "Options" on page 42. 4.4 Menus Some buttons have menus which open when activated. ► Tap on a menu point to execute its function. If you would like to quit the options list without selecting a function, tap on the button you used to open the menu.
User’s manual NAVIGON 13xx | 23xx ► After you have read and fully understood the message, tap on OK. If you do not accept the content of the message, tap on Cancel in order to switch the navigation device off again. The NAVIGATION window is opened. From here you can access all the functions of the navigation application. Initialising the GPS receiver Note: Good reception of GPS data requires an unobstructed path from the GPS receiver to the satellites.
User’s manual NAVIGON 13xx | 23xx If another window of the navigation application is open, tap on (Back). This will return you to the window you came from. ► 5.2 Tap on opened. (Back) repeatedly until the NAVIGATION window is Specifying a destination Under New Destination you can enter destinations to which you have not yet navigated or which you have not saved. Here you can enter the destination's address or coordinates, select a POI, or select a destination with the Direct Access function.
User’s manual NAVIGON 13xx | 23xx If you want to enter an address in a country in which normally the street comes first (e.g. Sweden, Norway,…), then the Street First menu will open. 1a TippenSelect whether you would like to enter the street first and then the location (Street First), or first the location and then the street (City First). Note: The following description is based on City First as the order for entering the address.
User’s manual NAVIGON 13xx | 23xx For detailed information on how to start navigation, please refer to chapter "Route preview" on page 34. Please read on there. Note: It is not necessary to enter all the address details. You can tap on Navigation before you get that far. If you specify the town only, the navigation system will calculate a route to the town centre.
User’s manual NAVIGON 13xx | 23xx (degrees), (minutes), (seconds). The (E W) button alongside the entry box indicates whether it is an eastern or western degree of longitude. ► 5.2.4 Tap on the button if you want to change the current setting. Points of interest Points of Interest, also called POI (Points Of Interest) for short, are useful addresses that are catalogued according to particular criteria.
User’s manual NAVIGON 13xx | 23xx 4. If the list is very long: ► Tap on (Close List). The keyboard appears. ► ► Enter a number of letters from the destination. Tap on (Open List). The list now contains only those destinations which begin with or contain the letters entered. 5. Tap on the name of the destination. The DETAILED INFORMATION ABOUT THE DESTINATION window opens. Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No).
User’s manual NAVIGON 13xx | 23xx ► Tap on (Open List). The list now contains only those destinations which begin with or contain the letters entered. 4. Tap on the name of the destination. The DETAILED INFORMATION ABOUT THE DESTINATION window opens. Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No). ► Tap on Activate MyRoutes in order to change the setting. 5. Tap on Navigation.
User’s manual NAVIGON 13xx | 23xx ► Tap on (Open List). The list now contains only those destinations which begin with or contain the letters entered. 6. Tap on the name of the destination. The DETAILED INFORMATION ABOUT THE DESTINATION window opens. Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No). ► Tap on Activate MyRoutes in order to change the setting.
User’s manual NAVIGON 13xx | 23xx 1. In the New Destination window tap on NAVIGATION. The NEW DESTINATION menu opens. In the Direct Access area you are shown the symbols of those POI categories that are available by direct access. 2. Tap on the category from which you would like to select a POI. A list opens. It contains the nearest POIs in the specified category, sorted by distance. 3. Tap on the name of the destination in order to start navigation to it. The map opens in Preview mode.
User’s manual NAVIGON 13xx | 23xx Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No). ► Tap on Activate MyRoutes in order to change the setting. 3. Tap on Navigation. - or Tap on Parking in order to search for a car park near your destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 34. Please read on there.
User’s manual NAVIGON 13xx | 23xx From many route planners on the Internet it is also possible to copy the entered destination address directly onto your navigation system. This function is clearly indicated on those websites which offer it. Note: NAVIGON Sync can be downloaded free of charge from www.navigon.com. Contacts which have been saved with several addresses will appear once with each address in the IMPORTED ADDRESSES list. 1. In the NAVIGATION window, tap on My Destinations > Imported Addresses.
User’s manual NAVIGON 13xx | 23xx 1. In the NAVIGATION window tap on Show Map. (Destination search) 2. Tap on The map opens in Destination search mode. 3. Tap on the point to which you want to navigate. Note: For details of how to change the map view so that your destination is easily seen refer to the chapter "Map in Destination search mode" on page 50. The destination that you have selected appears under the cross hairs.
User’s manual NAVIGON 13xx | 23xx Note: If you change the route profile, the changes will also apply to future navigations. Information about individual route profile settings can be obtained by tapping on the related (Help) button. Turn-by-Turn List ► If you want to see detailed directions for the route, tap on Options > Turn-by-Turn List. For details of the functions in the TURN-BY-TURN LIST window refer to chapter "Turn-by-Turn List" on page 55.
User’s manual NAVIGON 13xx | 23xx ► ► Tap on Cancel. The window in which you entered your destination will open again. Your destination is saved in the LAST DESTINATIONS list. Tap on Demo. The route will be calculated using the centre of the destination location as starting point. Navigation will then be simulated on this route. Tap on (Back) in order to terminate the demonstration. Note: If you selected the destination on the map, then the Demo button is not available. 5.
User’s manual NAVIGON 13xx | 23xx 1. Tap in the NAVIGATION window on New Destination > Enter an Address. The ADDRESS window opens. 2. Enter your home address. 3. Tap on Options > Save Destination. 4. Enter a name for the address. (For example "Home Address".) Your home address is now saved in the FAVOURITES list. 5. Tap on (Back). The NAVIGATION window opens. 6. Tap on My Destinations > Favourites. 7. Select from the FAVOURITES list the destination which you want to define as your new home address.
User’s manual NAVIGON 13xx | 23xx The starting point is only important if you want to see a planned route on the map but currently have no GPS reception, or if you are not currently at the planned starting point. This is why your selected starting point has the flow number "0". As soon as you start navigation, your current location will be used as the starting point for the route calculation. The first leg of the route is therefore the journey to the route point with flow number "1". 1.
User’s manual NAVIGON 13xx | 23xx 5.4.3 Editing route points Route points can be deleted from a route. The order of the route points can be changed as you wish. Note: The starting point (flow number "0") can be neither moved nor deleted. However you can make another route point into the starting point. ► Tap on the route point that you want to edit. The context menu contains the following buttons: Route Point Up: Moves the selected route point further to the front.
User’s manual NAVIGON 13xx | 23xx The ROUTE PLANNING window opens. The starting point and the route points of the loaded route have been entered. 5.4.5 Calculating and displaying routes It is possible to calculate and display a planned route on the map even without GPS reception in order to get an impression of the journey. The ROUTE PLANNING window is open. The starting point and at least one route point have been entered. ► Tap on Show Route. The map opens in Preview mode.
User’s manual NAVIGON 13xx | 23xx The ROUTE PLANNING window opens. 5.4.7 Route preview You have calculated and displayed a route. The map is open in Preview mode. Route Profile The route is calculated on the basis of a route profile. The current settings are indicated by symbols on the Profile) button at the top right edge of the map. (Route If you now want to view or change the route profile, tap on Route Profile.
User’s manual NAVIGON 13xx | 23xx Note: The MyRoutes function can be used only for routes with only one route point. For routes with two or more route points only one route is calculated and displayed, regardless of whether you have activated the function or not. Note: Even when the MyRoutes function is activated, sometimes only one additional route or no additional routes at all can be calculated for a particular route. No further suggestion is then shown on the button in question.
User’s manual NAVIGON 13xx | 23xx Delete All: Deletes all destinations in the list (LAST DESTINATIONS list or FAVOURITES list, depending on where you opened the options). The list is then empty. A dialog window prompts you to confirm deletion. Delete: Deletes the selected destination from the LAST DESTINATIONS or FAVOURITES list or the selected route from the SAVED ROUTES list. A dialog window prompts you to confirm deletion.
User’s manual NAVIGON 13xx | 23xx POI on Your Route: Opens a list with POIs lying on your route. A destination shown here can be selected as an interim destination and can be navigated to. Product Information: Here you are shown the version numbers and copyright details of the hardware and software. Rename: Opens a window in which you can change the name for the selected destination or route. Route Planning: Opens the ROUTE PLANNING window.
User’s manual NAVIGON 13xx | 23xx Turn-by-Turn List: Shows detailed directions for the route, including all points at which you must turn. (Refer to "Turn-by-Turn List" on page 55) 5.6 Working with the map 5.6.1 Selecting the navigation map Each country has its own navigation map. Seamless navigation over several maps on one continent is possible however if a continuous route can be calculated with the maps saved on the device.
User’s manual NAVIGON 13xx | 23xx 2 The current position is indicated (orange arrow). If you display a planned or loaded route and the specified starting point is not your current location, then it is possible that your current position will not be shown on the preview. 3 Symbols on the (Route Profile) button indicate the current settings in the route profile. If you tap on this button, the ROUTE PROFILE settings window will open.
User’s manual NAVIGON 13xx | 23xx 5.6.3 Map in Navigation mode After the route was shown in Preview mode, navigation was started. The map opens in Navigation mode. 1 Here is shown what signposts should be followed. 2 Here you can see any speed limits, warning signs or prohibiting signs. 3 The route is highlighted in orange. 4 When two manoeuvres need to be executed in quick succession, the small arrow box indicates the second manoeuvre to be executed.
User’s manual NAVIGON 13xx | 23xx If no distance is indicated, all the obstructions which are reported for your route and would lead to a loss of time will be avoided. ► Tap on the Traffic Information box in order to open the TRAFFIC INFORMATION window. (Refer to "Displaying traffic information" on page 57.) Note: The calculation of detour routes to avoid reported traffic obstructions can be performed automatically. (Refer to "TMC Settings" on page 59.
User’s manual NAVIGON 13xx | 23xx ► ► Tap on Options > Route > Turn-by-Turn List in order to view a turnby-turn list. (Refer to "Turn-by-Turn List" on page 55.) Tap on (Destination search) in order to view the map in Destination search mode. (Refer to "Map in Destination search mode" on page 50) Volume The volume of the spoken driving instructions can be adjusted during navigation. 1. Tap on (Volume). The volume bar opens. It contains three buttons for adjusting the volume. (Louder), 2.
User’s manual NAVIGON 13xx | 23xx ► a three-leg motorway junction ► the exit you must take to leave the motorway NAVIGON 13xx (Reality View light): ► the exit you must take to leave the motorway The Reality View mode shows with greater clarity the signposting and lanes you must follow. This display does not change until you have passed the spot indicated. The map will then change back to Navigation mode. If you want to change to Navigation mode before then, just tap on any point on the map.
User’s manual NAVIGON 13xx | 23xx Zoom Out: The map section shown becomes larger, but you will see fewer details. Zoom In: The map section becomes smaller, but you will see more details. Zoom Mode: When this button is active you can mark out a section of the map with the stylus or your finger. Mark out the section from upper left to bottom right to zoom in until the section fills the screen. Mark out the map section from bottom right to top left to zoom out.
User’s manual NAVIGON 13xx | 23xx The geographical coordinates of the destination and the corresponding address are shown in the bottom third of the screen. 2. Tap on (OK). 3. Buttons with various functions will be displayed. Take Me There: Starts navigation to the selected point. If you are currently navigating, this route navigation will be cancelled. MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about any changes to traffic monitoring systems and routing.
User’s manual NAVIGON 13xx | 23xx ► Tap on Interim Destination in order to set the selected point as an interim destination. The navigation system will first guide you to this interim destination. Afterwards you can continue navigation to your original destination. The Interim Destination button is available in navigation mode only. ► Tap on Navigation in order to navigate to the selected point. ► Tap on Cancel in order to close the list again.
User’s manual NAVIGON 13xx | 23xx ► Use the window. (Back) button to return to the DIRECT HELP Note: Only those help points are displayed which are situated no further than 30 mi from your position. 5.7.3 GPS Status, saving the current location In the GPS STATUS window you will find an overview of the data the navigation system calculates from the GPS signals it receives. The GPS status can be accessed from the options button in many windows. 1. Tap on Options > GPS Status.
User’s manual NAVIGON 13xx | 23xx Unblocking a route section ► Tap on Options > Unblock. The block will be lifted. The system recalculates the route. The unblocked route section can now be integrated into the calculation. 5.7.5 Turn-by-Turn List You can display detailed directions of the calculated route before starting navigation or at any time during navigation. This list displays all of the driving instructions in table form. The map is open in Preview mode: ► Tap on Options > Turn-by-Turn List.
User’s manual NAVIGON 13xx | 23xx Blocking route sections 1. Tap on the route sections that you do not want to travel on so that the 2. Tap on (Forbid) symbol appears next to them. (Modify Route). The navigation system calculates an alternative route avoiding the route sections selected. The new driving instructions are displayed in the TURN-BY-TURN LIST window. 3. Tap on (Back) in order to close the TURN-BY-TURN LIST window again.
User’s manual NAVIGON 13xx | 23xx ► Tap on the (Traffic Information) button. The PREVIEW TMC window opens. It shows a map view with the route section affected by the message. If the reported obstruction is likely to involve a considerable loss of time, a possible detour will also be shown. ► Tap on the button of the route you want to follow. - or - ► Tap on the Details button. The TRAFFIC INFORMATION window opens. (Refer to "Displaying traffic information" on page 57.
User’s manual NAVIGON 13xx | 23xx 1 The Traffic Information button shows the type of traffic messaging listed and how many messages of this type are in the list. ► 2 3 Tap on Traffic Information in order to select the messages you want displayed. This mark indicates that the message in question comes from a PremiumTMC provider. Here you can see how serious the obstruction is: Red: The section is blocked by the obstruction. This can be the case for example with road blocks.
User’s manual NAVIGON 13xx | 23xx 8 The navigation system can Detour ( ) or Ignore ( the route. The button shows the active status. ► 9 ) congestion on Tap on the button to select the alternative setting. (Show on Map): This button is only available if at least one of the indicated messages concerns your route. Tap on this button in order to open the PREVIEW TMC window. (Refer to "Preview TMC" on page 56.
User’s manual NAVIGON 13xx | 23xx Tap on the Traffic Information box. You can then decide whether an alternative route is to be calculated or not. 6 Configuring the NAVIGON 13xx | 23xx The SETTINGS window is the starting point for customising the NAVIGON 13xx | 23xx to match your personal preferences. Settings can be accessed via the options in the NAVIGATION window and via the options in many windows of the navigation application. ► Tap on Options > Settings.
User’s manual NAVIGON 13xx | 23xx For each setting there is a (Help) button. When you tap on it you will see an exact definition of the setting in question. You can close the settings windows in two ways: ► Tap on OK. ► Tap on Cancel. Any changes you have made will be adopted. Any changes you have made will not be adopted.
User’s manual NAVIGON 13xx | 23xx 7 Appendix 7.1 Technical data Dimensions Weight Operating conditions 95.8 x 72.3 x 17.6 mm approx. 120 g Operating temperature Storage temperature Humidity CPU Operating system Display Memory Flash RAM GPS TMC Device keys I/O Power supply Rechargeable battery Charging Power pack (accessories) Car charger cable 7.
User’s manual NAVIGON 13xx | 23xx Voltage Directive (73/23/ECC) – as amended by Directive 93/68/ECC – issued by the European Community Commission. Compliance with these directives implies conformity with the following European Standards: EN 300 440-1 V1.3.1 (2001-09), EN 300 440-2 V1.1.2 (2004-07), EN 301 489-1 V1.6.1 (2005-09), EN 301 489-3 V1.4.
User’s manual NAVIGON 13xx | 23xx My NAVIGON 13xx | 23xx makes no response any longer, the screen is frozen. Perform a reset. This can be done in two ways: 1. Use a thin object to press the Reset key. (Refer to "Description of the NAVIGON 13xx | 23xx" on page 7) The device is now deactivated. 2. Press the (On/Off) key for at least 10 seconds. The software will be restarted. Your settings and your saved destinations and routes will be retained. - or – 1. Press the (On/Off) key for at least 6 seconds.
User’s manual NAVIGON 13xx | 23xx 9 Index A Advise of Safety Cameras................. 64 B Block............................................ 54, 56 C Compass ........................................... 18 Configuration ..................................... 60 Conventions followed in this manual................................................. 5 Current Position Save.............................................. 54 D Data entry.......................................... 21 Destination Direct Access.....
User’s manual NAVIGON 13xx | 23xx Preview ......................................... 45 Reality View .................................. 49 Memory card ..................................... 12 Menu ................................................. 22 Muting................................................ 19 My Destinations................................. 24 MyRoutes .................................... 35, 41 N Navigation Block ....................................... 54, 56 MyRoutes........................
User’s manual NAVIGON 13xx | 23xx Symbols ........................................ 18 Tuning Mode ................................. 59 TMC Settings Recalculate Route ........................ 59 TMC .............................................. 59 Traffic Information......................... 59 Tuning Mode ................................. 59 Trade marks ........................................ 5 Traffic Information Preview TMC ................................ 56 Recalculate Route ........................
