User’s manual NAVIGON 33xx | 43xx max English (United Kingdom) January 2009
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification.
User’s manual NAVIGON 33xx | 43xx max Table of contents 1 Introduction .......................................................................................6 1.1 About this manual.....................................................................................6 1.1.1 1.1.2 1.2 Legal notice ..............................................................................................6 1.2.1 1.2.2 1.3 2 Questions about the product .................................................................
User’s manual NAVIGON 33xx | 43xx max 6 Navigation .......................................................................................22 6.1 Starting the navigation application .........................................................23 6.2 Specifying a destination .........................................................................24 6.2.1 6.2.2 6.2.3 6.2.4 6.2.5 6.2.6 6.2.7 6.2.8 6.2.9 Specifying the country in which the destination is situated........25 Entering a destination address .....
User’s manual NAVIGON 33xx | 43xx max 7 Handsfree Module (only NAVIGON 4350 max) .............................62 7.1 Connection with Mobile Phone...............................................................63 7.1.1 7.1.2 7.1.3 7.1.4 7.1.5 7.1.6 7.2 Taking a call ...........................................................................................68 7.3 Making a call ..........................................................................................68 7.3.1 7.3.2 7.3.3 7.3.4 7.3.5 7.
User’s manual NAVIGON 33xx | 43xx max 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics: Product names SMALL CAPITALS: Window and dialogue box titles Bold: Highlighting of important parts in the text Underlined: Names of buttons, input boxes and other elements on the user interface Underlined and italics: Names of control elements on the navigation device 1.1.
User’s manual NAVIGON 33xx | 43xx max names and company names used in this document are or may be trade marks or registered trademarks of their respective owners. All rights reserved except those explicitly granted. If the registered trade marks used in this manual are not explicitly identified as such, this does not imply that the name is not subject to the rights of a third party. Microsoft, Outlook, Excel and Windows are registered trade marks of the Microsoft Corporation.
User’s manual NAVIGON 33xx | 43xx max 2.2 2.3 Description of the NAVIGON 33xx | 43xx max 1 Touch-screen 2 Microphone 3 LED 4 Reset 5 Mini USB socket for USB cable / car charger cable 6 Slot for microSD memory card 7 On/Off Important safety information In your own interest, please read the following safety information and warnings carefully before starting up your navigation system. 2.3.1 Navigation safety information Use the navigation system at your own risk.
User’s manual NAVIGON 33xx | 43xx max Caution! Traffic regulations have priority over any instructions from the navigation system. Caution! Follow the instructions of the navigation system only when the circumstances and the road traffic regulations allow you to do so! The navigation system will still guide you to your destination even if you deviate from the calculated route. Caution! Check that the cradle is secured and adjusted properly before each journey.
User’s manual NAVIGON 33xx | 43xx max 2.3.3 Safety guidelines when installing the device in your car Caution! Fasten the cradle so that the navigation device is easy to see and operate by the driver. Make sure that the driver's view of the traffic is not impeded. Caution! Do not attach the cradle within the working zone of any airbags. Caution! Do not fasten the cradle too close to the steering wheel or other controls. The driver must not be obstructed in operating any car functions.
User’s manual NAVIGON 33xx | 43xx max Assembling the cradle (illustration similar) ► Assemble the cradle as shown in the illustration. No tools are needed for this. Securing the cradle (illustration similar) 1. Clean the suction cup and that part of the windscreen to which you want to secure the cradle. Both must be dry and free of dirt and grease. 2. Open the lever on the suction cup as far as possible. 3. Place the cradle suction cup against the windscreen. 4. Press the lever towards the windscreen.
User’s manual NAVIGON 33xx | 43xx max Inserting the navigation device into the cradle (illustration similar) On the back of the NAVIGON 33xx | 43xx max you will see a circle with two recesses. 1. Hang the navigation device by the upper recess on the upper lug of the cradle. (See illustration) 2. Then press it towards the cradle so that it latches in place.
User’s manual NAVIGON 33xx | 43xx max 1. Pull the clip towards yourself so that the device is released from the clip. 2. Lift the device up and out of the cradle. 2.4.2 TMC antenna The NAVIGON 33xx | 43xx max has an integrated TMC receiver. The TMC antenna is integrated in the car charger cable. Once the car charger cable is connected, the device can receive current traffic messages. If required, it can change your route dynamically, e.g. in order to avoid a traffic jam. 2.4.
User’s manual NAVIGON 33xx | 43xx max Data from at least three satellites is required for positioning with an acceptable degree of accuracy. With data from four or more satellites it is possible in addition to determine the position's altitude above sea level. Positioning is accurate to within three metres. Once the navigation device has determined your position, this position can be used as a starting point for calculating a route.
User’s manual NAVIGON 33xx | 43xx max Switching the navigation device to standby mode ► Press briefly (max. 1.5 seconds) on the (On/Off) key. - or 1. Tap in the NAVIGATION window of the navigation software on the button. 2. Tap on Standby. Automatic Standby You can configure the NAVIGON 33xx | 43xx max so that the navigation device is automatically switched to standby mode. ► ► ► In the NAVIGATION window tap on Options > Settings > General > Automatic Standby.
User’s manual NAVIGON 33xx | 43xx max 3.1 Manual An excerpt of this manual describing the most important functions of the navigation software is saved on the navigation device. To open the manual: 1. Tap in the NAVIGATION window on Options > Manual. The TABLE OF CONTENTS window opens. 2. Tap on the name of the chapter you want to read. The content of the chapter is shown. With the (Up) and (Down) buttons you can scroll up one page and down one page respectively.
User’s manual NAVIGON 33xx | 43xx max Note: The password must have exactly 4 digits. 4.2 Changing a password 1. In the NAVIGATION window tap on Options > Settings > Options > Password Lock. The ENTER PASSWORD window opens. 2. Enter the currently valid password in the Enter password box. 3. Tap on Change password. The NEW PASSWORD window opens. 4. Enter a password in the New password box and tap on Next. 5. Enter this password again in the Confirm new password box. 6. Tap on Activate.
User’s manual NAVIGON 33xx | 43xx max GPS The GPS symbol can indicate the following GPS reception states: No GPS (No symbol): The built-in GPS receiver is not operational. Contact customer service if the problem persists. No Signal: Data is being received from less than three satellites. Position cannot be calculated. GPS Ready: Data is being received from at least three satellites. Position can be calculated.
User’s manual NAVIGON 33xx | 43xx max For details of the TMC function refer to chapter "TMC (Traffic Information)" on page 58. Energy The Energy symbol can indicate the following states of the integrated battery: The device is being supplied by an external power source. The battery is fully charged. - or The battery cannot be charged because its temperature is too high or too low. The device is being supplied by an external power source. The battery is being charged.
User’s manual NAVIGON 33xx | 43xx max Call in Progress (green mobile phone): The hands-free module of the NAVIGON 4350 max is being used for a phone call. Muting The Muting symbol can indicate the following states: No symbol: The navigation application is not muted. Muting: The navigation application is muted. If the device is navigating at the moment, you will not hear any driving instructions. Note: This symbol indicates only the muted state of the navigation instructions.
User’s manual NAVIGON 33xx | 43xx max When you want to save a destination to Favourites or when you enter a POI category or a country, the keyboard with the alphabet of the user interface will open automatically. You can also switch from the Cyrillic or Greek keyboard to the Latin keyboard. Many addresses can then also be entered as transliterations or in the language of the user interface. Example: The language of the user interface is English. You want to navigate to Moscow.
User’s manual NAVIGON 33xx | 43xx max Tap on (Open List) to call up this list. You can use the through the list. (Up) button and the ► ► (Down) button to move Tap on an entry in the list to select it and transfer it to the input box. The list closes once an entry has been selected. You are now finished with entering the city. ► Tap on an entry. (Close List) in order to close the list without selecting Note: The list opens automatically as soon as it contains only 5 or less entries. 5.
User’s manual NAVIGON 33xx | 43xx max Arriving at your destination When you have reached your selected destination, a message to this effect will be displayed. Only your current position (orange arrow) will now be shown on the map. 6.1 Starting the navigation application You have switched on the navigation device and, if necessary, entered the password.
User’s manual NAVIGON 33xx | 43xx max The integrated GPS receiver is not initialised for the first time until the navigation application is started for the first time. It can take up to 20 minutes to initialise the GPS receiver for the first time. Note: If the GPS symbol indicates GPS Ready after far less than 20 minutes, it is advisable to leave the navigation device switched on for at least another 15 minutes in order to ensure reliable operation of the receiver.
User’s manual NAVIGON 33xx | 43xx max Under My Destinations the NAVIGON 33xx | 43xx max provides the following lists of destinations and addresses for you to select from: ► ► ► FAVOURITES: All destinations that you have entered in the NAVIGON 33xx | 43xx max and then saved. LAST DESTINATIONS: Destinations to which you have navigated on a previous occasion. IMPORTED ADDRESSES: Here there may be 2 lists to choose from: ► ► 6.2.
User’s manual NAVIGON 33xx | 43xx max The ADDRESS window opens. 2. Enter the name or the postal code of the destination town. 3. Enter the name of the destination street. 4. Enter the house number. If you do not know the house number, then leave this box empty. If you don't know the house number but know the name of a nearby side street, then tap on the Cross Street box and enter the name of this street. The navigation system will calculate a route to the intersection of the streets you have entered.
User’s manual NAVIGON 33xx | 43xx max 6.2.3 Enter Coordinates You can also enter the geographic coordinates of your destination. The coordinates can be entered as decimal degrees or in degrees, minutes and seconds. 1. Tap in the NAVIGATION window on New Destination > Enter an Address. The ADDRESS window opens. 2. Tap in the ADDRESS window on Options > Enter Coordinates. The ENTER COORDINATES window opens. Entering as a decimal number 3. Enter the degree of latitude.
User’s manual NAVIGON 33xx | 43xx max Points of interest can be displayed on the map by means of a symbol. In the NAVIGATION window tap on Options > Settings > Map Display > Categories Shown in order to select the categories you want to appear on the map. POI nearby POIs nearby are POIs located within a certain radius of your current location. This means you can always find the nearest petrol station for example, no matter where you are.
User’s manual NAVIGON 33xx | 43xx max Indicated on the Activate 'MyRoutes' button is whether several route suggestions are to be calculated (Yes) or not (No). ► Tap on Activate 'MyRoutes' in order to change the setting. 6. Tap on Start Navigation. - or Tap on Parking in order to search for a car park near your destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 36.
User’s manual NAVIGON 33xx | 43xx max Tap on Parking in order to search for a car park near your destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 36. Please read on there. POI in a particular location POIs in a particular location can be useful when navigating in an unfamiliar town. 1. In the NAVIGATION window tap on New Destination > Search for POI > in a City.
User’s manual NAVIGON 33xx | 43xx max In this case a window opens with all the destinations matching your entry plus additional information. ► Tap on the destination to which you want to navigate. 7. Tap on Start Navigation. - or Tap on Parking in order to search for a car park near your destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 36. Please read on there.
User’s manual NAVIGON 33xx | 43xx max For detailed information on how to start navigation, please refer to chapter "Route preview" on page 36. Please read on there. 6.2.5 Information about the destination For many destinations that you specify, there will be further information available, stored in the navigation system's database. There is, for example, a telephone number available for many restaurants. You can then call the restaurant to reserve a table, for example.
User’s manual NAVIGON 33xx | 43xx max 3. Tap on Start Navigation. - or Tap on Parking in order to search for a car park near your destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 36. Please read on there. Note: Favourites are indicated on the map by a small flag with their name. 6.2.
User’s manual NAVIGON 33xx | 43xx max Note: NAVIGON Sync can be downloaded free of charge from www.navigon.com/33maxseries or www.navigon.com/43maxseries. Contacts which have been saved with several addresses will appear once with each address in the IMPORTED ADDRESSES list. 1. Tap in the NAVIGATION window on My Destinations > Imported Addresses. NAVIGON 4350 max: In the NAVIGATION window tap on My Destinations > Imported Addresses > From Outlook. 2. Tap on the address to which you want to navigate.
User’s manual NAVIGON 33xx | 43xx max Tap on Parking in order to search for a car park near your destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 36. Please read on there. 6.2.10 Navigating home In NAVIGON 33xx | 43xx max you can save an address as your home address. You can navigate to your home address at any time by pressing a single button.
User’s manual NAVIGON 33xx | 43xx max 5. Tap on Take Me There. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 36. Please read on there. 6.2.12 Route preview The map is open in Preview mode. The navigation destination is depicted by a small flag. For detailed information refer to the chapter "Map in Preview mode" on page 46.
User’s manual NAVIGON 33xx | 43xx max When calculating the time of arrival or the trip time, the navigation system takes account of additional factors such as day of the week and time of day. The route which corresponds best to the selected route profile is marked with "MyRoute". Note: Even when the MyRoutes function is activated, sometimes only one additional route or no additional routes at all can be calculated for a particular route. No different route is then shown on the button in question.
User’s manual NAVIGON 33xx | 43xx max 6.3.1 Saving destinations 1. Enter a destination (refer to "Entering a destination address " on page 25 or "Points of interest" on page 27). Do not tap on the Start Navigation button! 2. Tap on Options > Save Destination. - or 1. Select a destination from the LAST DESTINATIONS list or from the IMPORTED ADDRESSES list (refer to "Last Destinations" on page 33 or "Imported Addresses from Outlook" on page 33). Do not tap on the Start Navigation button! 2.
User’s manual NAVIGON 33xx | 43xx max Note: The home address is also indicated on the map by a house symbol. Changing the home address You can define a different address as the home address at any time. Proceed as described above. 6.4 Multi-leg routes It is possible to plan routes without GPS reception, for example in the comfort of your home. Planned routes can be saved for later use. This allows you to plan as many routes as you like, for example for your holidays. 1.
User’s manual NAVIGON 33xx | 43xx max The selected starting point will now be displayed next to the 0 button (Starting Point). Changing the starting point ► Tap on the starting point (button 0). The STARTING POINT menu opens. You can now enter a different starting point. Proceed as described above. 6.4.2 Entering route points The route points of a route are the destinations that you want to navigate to. The flow number for each route point is indicated on a button in front of it. 1.
User’s manual NAVIGON 33xx | 43xx max Delete: Deletes the selected route point. A dialog window prompts you to confirm deletion. 6.4.4 Managing routes You can save each planned route under a particular name. Note: Only the start point and route points will be saved, not the calculated route. When you load a saved route, it must be recalculated before navigation can start. You can load, rename or delete stored routes. Saving routes The ROUTE PLANNING window is open.
User’s manual NAVIGON 33xx | 43xx max Note: GPS reception is not necessary for simulation. If you have planned a multi-leg route, only the first leg will be simulated. You have calculated and displayed a route. ► Tap on Options > Simulation. The route will be recalculated for simulation purposes. Simulation starts when calculation has finished. Stopping simulation You can stop simulation at any time. ► Tap on (Back). The ROUTE PLANNING window opens. 6.4.
User’s manual NAVIGON 33xx | 43xx max MyRoutes When the MyRoutes function is activated, the navigation system calculates up to three routes on the basis of the currently selected route profile and shows them on the map in different colours (orange, green, blue) and with a number. For each route there is a button with the same number and a symbol in the same colour.
User’s manual NAVIGON 33xx | 43xx max 2D/3D: Changes between 2D and 3D mode. The symbol indicates the current mode. Add to Route: Opens the route planning. The address specified will be added as a route point. (Refer to "Multi-leg routes" on page 39.) Block: Opens a window in which you can block a section of the route lying ahead in order to calculate a route which avoids this section, e.g. if you have heard on the radio of a traffic jam relating to this section. (Refer to "Block" on page 55.
User’s manual NAVIGON 33xx | 43xx max Interim Destination: Sets the selected point as interim destination. The navigation system will first guide you to this interim destination. Afterwards you can continue your original navigation. Manual: Opens the manual on the navigation device. Refer to "Manual" on page 16.) MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about any changes to traffic monitoring systems and routing. MyRoutes: Opens the map in Preview mode.
User’s manual NAVIGON 33xx | 43xx max Save Route: Opens a window in which you can save the planned route under a specific name. (Refer to "Saving routes" on page 41) Saved Routes: Opens a dialog window into which you can load a saved route. Settings: Opens the SETTINGS window. Here you can configure the navigation system. (Refer to "Configuring the NAVIGON 33xx | 43xx max" on page 61) Show on Map: Shows the selected address on the map. Simulation: Simulates a navigation on the route indicated.
User’s manual NAVIGON 33xx | 43xx max The map opens in Preview mode. 1 When the MyRoutes function is activated, up to three numbered routes are indicated on the map in different colours (orange, green, blue). When the MyRoutes function is deactivated or if you have planned a route with more than one route point, only one route is displayed. 2 The current position is indicated (orange arrow).
User’s manual NAVIGON 33xx | 43xx max In the case of a multi-leg route, the distance and the estimated driving time for each leg are displayed. ► ► Tap on the (Route Profile) button (see Figure, point 3) in order to view and if necessary change the profile on which the route calculation is based. To start the navigation, tap on the button for the route (see Figure, point 4) you want to use for the navigation. If you display a planned or loaded route, the route may be recalculated.
User’s manual NAVIGON 33xx | 43xx max The nearer you get to the junction, the more yellow spots are displayed. If you don't have to change direction for a long time, you will see only a straight arrow. The distance you must continue straight on is indicated underneath the arrow. ► 6 Tap on the large arrow box to hear current route instructions. The Traffic Information box opens if a reported traffic obstruction affects your route.
User’s manual NAVIGON 33xx | 43xx max 12 If you are navigating a multi-leg route, you will see the remaining distance to the next interim destination and the estimated time of arrival in the Next box. ► ► Tap on the arrival time if you want to see the estimated driving time instead. Tap once again on the info box if you want to see the estimated time of arrival. 13 The name of the route section that you need to drive onto next is shown in the upper road box.
User’s manual NAVIGON 33xx | 43xx max Map options in Navigation mode ► Tap on Options. A window with several buttons opens. The most important functions for navigation can be reached via buttons with symbols. Other functions are found by tapping on one of the buttons Destination, Route, Services or General. A description of all available options can be found in the chapter "Options" on page 43. 6.6.
User’s manual NAVIGON 33xx | 43xx max Note: The Reality View mode is not available for all motorway junctions and three-leg motorway junctions. Availability depends on the map material used. 6.6.5 Map in Destination search mode The map is always in Destination search mode, when a pair of cross hairs are to be seen. Indicated in the address box are the coordinates and, where applicable, the name of the street under the cross hairs. When you are driving, the map does not change.
User’s manual NAVIGON 33xx | 43xx max Entire Route: Zooms the map so that the entire route is visible. Current Position: Selects the section of map displayed so that the current location is at the centre. Operating in Destination search mode 1. Tap on the point to which you want to navigate. The destination that you have selected appears under the cross hairs. The geographical coordinates of the destination and the corresponding address are shown in the bottom third of the screen. 2. Tap on (OK). 3.
User’s manual NAVIGON 33xx | 43xx max 6.7 Useful functions 6.7.1 Nearby During the navigation, or after having opened the map using the Show Map button, you can have POIs, Favourites and traffic information of the current map view shown in a clearly arranged list. Note: This function is not available if the map was opened in one of the modes Destination search, Preview or Reality View. 1. Tap on any point on the map. The NEARBY list opens.
User’s manual NAVIGON 33xx | 43xx max The nearest help point in the selected category will be indicated. You are shown the name, address, phone number (if known), distance and direction of the help point from your current location. You have the following options: ► Only NAVIGON 4350 max: Tap on the Call button in order to call the number indicated. The Call button is not available if no phone number is saved for the help point or if the navigation device has no Bluetooth connection to a mobile phone.
User’s manual NAVIGON 33xx | 43xx max Note: The block is valid only for the current navigation. It no longer exists on a new navigation. You are currently in a navigation. The map is open in Navigation mode. 1. Tap on Options. Buttons with various functions will be displayed. 2. Tap on Block. The BLOCK menu opens. It contains buttons with different distance values. 3. Select the distance you want to block. Note: If you are currently driving on a motorway, the alternative route will begin at the next exit.
User’s manual NAVIGON 33xx | 43xx max 1 Schematic depiction of the next junction where you must make a turn. 2 Distance to this junction. 3 Route instruction and if available the name of the street into which you must turn. 4 Indicates whether you want to drive on the route section in question or not. (Allow): The section in question is allowed on the route. (Forbid): The section in question is not allowed on the route. Blocking route sections 1.
User’s manual NAVIGON 33xx | 43xx max 6.7.6 TMC (Traffic Information) The integrated TMC receiver enables the navigation system to make use of current traffic messaging. If necessary it can change your route dynamically, for example in order to avoid a traffic jam. Note: TMC is available free of charge in many European countries. PremiumTMC, promising a faster and more up-to-date service, is offered (exclusively or in addition) in some countries at a charge.
User’s manual NAVIGON 33xx | 43xx max ► Tap on the button of the route you want to follow. - or - ► Tap on the Details button. The TRAFFIC INFORMATION window opens. (Refer to "Displaying traffic information" on page 59.) Note: If you tap on a traffic symbol (in the display: ) in the map view of the PREVIEW TMC, a window with detailed information about this message will open. (Refer to "Showing a single message in detail" on page 60.
User’s manual NAVIGON 33xx | 43xx max 3 Here you can see how serious the obstruction is: Red: The section is blocked by the obstruction. This can be the case for example with road blocks. Yellow: The section is not blocked by the obstruction but there is a threat of considerable delays. This can be the case for example with traffic jams or when one of several lanes is blocked off. No colour: The obstruction is not classified as serious.
User’s manual NAVIGON 33xx | 43xx max In the TMC SETTINGS window you can set the TMC traffic station and configure whether the reception of a traffic message concerning your route should affect your route planning and if so how. Tuning Mode Tap on Tuning Mode and select a method for selecting the TMC radio station. ► ► ► Automatic: You can use the arrow keys in the station area to select another station. The system will search for another station if reception becomes poor.
User’s manual NAVIGON 33xx | 43xx max Every trip from now on will be recorded until you reset Logbook to No. It is possible, however, to exclude individual trips from the recording. Before a trip If your trips are recorded in the logbook, a window for entering the trip's key data is opened before navigation starts. You can also decide, however, not to record the trip in question. ► If you don't want to record the trip in question, tap on (Cancel). - or - 1. Enter a name for this entry, e.g.
User’s manual NAVIGON 33xx | 43xx max NAVIGON 4350 max has found your Bluetooth device you can initiate the pairing. (Refer to "Pairing with a device" on page 64.) ► Tap on No if you want to initiate the connection later. (See chapter "Searching for and pairing Bluetooth devices" on page 63) Operating the hands-free module All functions can be reached from the HANDSFREE MODULE window. ► ► 7.1 Tap on (Navigation) in order to move the navigation application into the foreground.
User’s manual NAVIGON 33xx | 43xx max Note: In this case the phone book and recent calls are only available when the phone in question is connected. For details of how to import the phone book and recent calls refer to the chapters "Import Phone Book" on page 66 and "Import recent calls" on page 67. Searching for devices 1. Make sure that the Bluetooth function is activated on both the mobile phone and the NAVIGON 4350 max. If you want to set up a connection to a headset, the headset must be switched on.
User’s manual NAVIGON 33xx | 43xx max 7.1.2 Pairing from the mobile phone Note: Please consult the mobile phone's manual if you are uncertain about how to carry out the following steps on the mobile phone. 1. Make sure that the Bluetooth function is activated on both, the mobile phone and the NAVIGON 4350 max. To perform the pairing from the mobile phone, the functions Discoverable by Others and Others May Connect must also be activated on the NAVIGON 4350 max. 2.
User’s manual NAVIGON 33xx | 43xx max existing connection is disconnected automatically as soon as the connection to a different device is initiated. 1. Make sure that Bluetooth is activated on your navigation device. ► ► If you want to connect to a mobile phone, make sure that Bluetooth is activated on the mobile phone and that the Discoverable by Others and Others May Connect functions are also activated. If you want to connect to a headset, make sure that the headset is switched on. 2.
User’s manual NAVIGON 33xx | 43xx max phone from which the phone book was imported. As soon as you connect to a different phone or disconnect the connection, the phone book will no longer be available on the hands-free module. 1. Set up a connection to the mobile phone whose phone book you want to import. (See chapter "Connecting to a device" on page 65) 2. Tap in the HANDSFREE MODULE window on the Phone Book button. The phone book import is started.
User’s manual NAVIGON 33xx | 43xx max connect to a different phone or disconnect the connection, the recent calls will no longer be available on the hands-free module. 1. Set up a connection to the mobile phone whose recent calls you want to import. (See chapter "Connecting to a device" on page 65) 2. Tap in the HANDSFREE MODULE window on the Recent Calls button. The recent calls import is started. When the import is completed, the recent calls are shown. 7.
User’s manual NAVIGON 33xx | 43xx max 7.3.3 Calling a contact from the phone book If the NAVIGON 4350 max is connected to a mobile phone whose phone book was already imported, you can also dial numbers from the phone book. 1. In the HANDSFREE MODULE window tap on Phone Book. If the phone book of the connected phone was not yet imported, the import will be started now; refer to "Import Phone Book" on page 66. 2. Select from the phone book the contact you want to call. 3. Tap on (OK).
User’s manual NAVIGON 33xx | 43xx max 7.3.5 Transferring a call from your mobile telephone The NAVIGON 4350 max takes calls automatically from the mobile phone as soon as a Bluetooth connection is established between the two devices. 7.4 During a call You are calling using the hands-free module. The CALL IN PROGRESS window is open. 7.4.1 Moving the navigation application to the foreground You can move the navigation application to the foreground at any time.
User’s manual NAVIGON 33xx | 43xx max 7.4.4 Transferring a call to the mobile phone ► Tap in the CALL IN PROGRESS window on Options > Use Mobile Phone. You can now continue the call from your mobile phone. 7.4.5 Ending the call ► Tap in the CALL IN PROGRESS window on the Hang up button in order to end the call. 7.5 Useful functions 7.5.1 Navigating to a contact from the phone book You can also use the address of a contact in the phone book as a destination for the navigation system. 1.
User’s manual NAVIGON 33xx | 43xx max The PRESET window opens. 2. Tap on the to define. (Edit) button to the right of the Speed Call you want The MODIFY PRESET window opens. Entering a new Speed Call number or editing an existing Speed Call number 3. Tap on the (Modify Preset) button. 4. Enter the name and the number for the selected Speed Call button or edit the existing name and number. 5. Tap on OK. Adopting a number from the phone book of the mobile phone 3. Tap on the From the phone book button.
User’s manual NAVIGON 33xx | 43xx max Bluetooth Function: Select whether you want to activate the Bluetooth function (Yes or No). The hands-free module cannot connect to a mobile phone or headset if the Bluetooth function is deactivated. Discoverable by Others: Select whether other Bluetooth-capable devices (in particular mobile phones) should be able to detect the NAVIGON 4350 max (Yes or No). Others May Connect: Select whether other devices should be able to initiate a connection (Yes or No).
User’s manual NAVIGON 33xx | 43xx max Some settings can have only one of two values. These settings can be recognised by the (Toggle) button. All possible values are visible. The currently valid value is highlighted in white. ► Tap on values. (Toggle) in order to switch between the possible Some settings can adopt many different values. These settings can be recognised by the 1. Tap on (List) button. The current value is visible. (List). A list with all possible values opens.
User’s manual NAVIGON 33xx | 43xx max 9 Appendix 9.1 Technical data Dimensions Weight Operating conditions 118.8 x 75.5 x 21.5 mm approx.
User’s manual NAVIGON 33xx | 43xx max 9.2 Identification and serial number The navigation system comes with various identification labels (e.g. CE label, serial number, ...). These labels are located on the bottom of the device in the area of the charge pilot lamp (LED). 9.3 Declaration of conformity The NAVIGON 33xx | 43xx max described in this manual bears the CE label among others.
User’s manual NAVIGON 33xx | 43xx max will go. (Refer to "Description of the NAVIGON 33xx | 43xx max" on page 8) My NAVIGON 33xx | 43xx max makes no response any longer, the screen is frozen. Perform a reset. This can be done in two ways: ► Use a thin object to press the Reset key. (Refer to "Description of the NAVIGON 33xx | 43xx max" on page 8.) - or - 1. Press the (On/Off) key and keep it pressed until the device switches off. (Approx. 4 seconds.) The device is now deactivated. 2.
User’s manual NAVIGON 33xx | 43xx max 11 Index B Block............................................ 55, 57 Bluetooth Connect ........................................ 65 Pairing........................................... 63 C Call Dial Number .................................. 68 Phone Book .................................. 69 Preset ........................................... 68 Recent Calls ................................. 69 Call in Progress Enter numerals ............................. 70 Hang up ...
User’s manual NAVIGON 33xx | 43xx max Handsfree Module Incoming Call ................................ 68 Muting ........................................... 70 Open ............................................. 62 Pairing........................................... 63 Phone Book .................................. 69 Preset ..................................... 68, 71 Recent Calls ................................. 69 Settings ................................... 71, 72 Show Map ................................
User’s manual NAVIGON 33xx | 43xx max Preset ................................................ 71 Preview TMC..................................... 58 R Reality View....................................... 51 Recalculate Route ............................. 61 Recent Calls Import recent calls ........................ 67 Recent Calls ...................................... 69 Route Planning.................................. 39 Route points Add ............................................... 40 Delete ..........
