User’s manual NAVIGON 63xx English (United Kingdom) September 2009
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification.
User’s manual NAVIGON 63xx Table of contents 1 Introduction .......................................................................................7 1.1 About this manual ...................................................................................7 1.1.1 1.1.2 1.2 Legal notice.............................................................................................7 1.2.1 1.2.2 1.3 2 Questions about the product ...................................................................8 2.
User’s manual NAVIGON 63xx 6 7 Voice Command..............................................................................23 6.1 Use Voice Command ............................................................................23 6.2 Help.......................................................................................................23 6.3 Deactivation of the voice commands function.......................................24 6.4 Configuring the voice commands function .............................
User’s manual NAVIGON 63xx 9.4 Map in Navigation mode .......................................................................54 9.4.1 9.4.2 9.4.3 9.4.4 9.4.5 9.4.6 9.5 Map in Destination search mode...........................................................61 9.5.1 10 Navigation in Vehicle mode ....................................................54 Navigation in Pedestrian mode ...............................................58 Navigation in Track mode ..................................................
User’s manual NAVIGON 63xx 11.2 Taking a call ..........................................................................................83 11.3 Making a call .........................................................................................84 11.3.1 11.3.2 11.3.3 11.3.4 11.3.5 11.3.6 Making a call with the voice commands function ....................84 Dialling a telephone number ...................................................85 Dialling a Speed Call number .....................................
User’s manual NAVIGON 63xx 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics: Names of products SMALL CAPITALS: Names of windows and dialogue boxes Bold: Highlighting of important parts in the text Underlined: Descriptions of buttons, input boxes and other elements on the user interface Underlined and italics: Names of control elements on the navigation device 1.1.
User’s manual NAVIGON 63xx 1.2.2 Trademarks All brand and trade marks mentioned in this document and registered by third parties are subject without reservation to copyright law and the proprietary rights of their respective owners. All trade marks, trade names and company names used in this document are or may be trade marks or registered trademarks of their respective owners. All rights reserved except those explicitly granted.
User’s manual NAVIGON 63xx 2.2 Description of the NAVIGON 63xx 1 Touch-screen 2 Microphone 3 LED 4 Reset 5 Mini USB socket for USB cable / mains adapter 6 Slot for microSD memory card 7 On/Off 2.3 NAVIGON Suite NAVIGON Suite is an application for your PC or Mac with many useful functions. ► Read the manual (PDF file) for your navigation device. ► Get information about useful accessories.
User’s manual NAVIGON 63xx How to install NAVIGON Suite: 1. Connect the navigation device to your computer with a USB cable. 2. Open the file manager on your PC or Mac (e.g. "Windows-Explorer" on a PC or "Finder" on a Mac). 3. Open the NAVIGON window. 4. Execute the PC_Start.exe file (PC) or MAC_Start.exe file (Mac). NAVIGON Suite is opened. 5. Select your language. 6. Select the function you want. 7. Follow the instructions on the screen. 2.
User’s manual NAVIGON 63xx 2.4.2 Safety information for the navigation device Caution! Protect the device from moisture. The device is neither waterproof nor protected against splash water. Caution! Do not open the case of the navigation device under any circumstances. Caution! Do not expose the navigation device to extreme heat or cold. This may damage the device or impair its function. (Refer to "Technical data" on page 91) Caution! Never unplug by pulling the cable.
User’s manual NAVIGON 63xx Caution! When installing the cradle, make sure that it will not pose a risk in the event of an accident. Caution! Do not run cables directly next to safety-relevant devices and power supplies. Caution! Check that the cradle is secured and adjusted properly before each journey. The suction cup may become loose after a while. Caution! After installation, check all safety-relevant equipment in the car.
User’s manual NAVIGON 63xx Inserting the navigation device into the cradle On the back of the NAVIGON 63xx you will see a circle with two recesses. 1. Hang the navigation device by the upper recess on the upper lug of the cradle. (See illustration) 2. Then press it towards the cradle so that it latches in place.
User’s manual NAVIGON 63xx 2.5.2 TMC antenna The NAVIGON 63xx has an integrated TMC receiver. The TMC antenna is integrated in the car charger cable. Once the car charger cable is connected, the device can receive current traffic messages. If required, it can change your route dynamically, e.g. in order to avoid a traffic jam. 2.5.3 Memory card The scope of delivery includes a 1 GB microSD card containing the navigation maps.
User’s manual NAVIGON 63xx 3 Switching on the NAVIGON 63xx 1. Press the (On/Off) key and keep it pressed until the device switches on. (Approx. 1,5 seconds) If password protection has been activated, the ENTER PASSWORD window opens. 2. Enter the password. 3. Tap on OK. The NAVIGATION window opens. When you start the navigation application for the first time, the DEMO MODE settings window opens. Demo mode is intended only for demonstrating the product when no GPS reception is possible.
User’s manual NAVIGON 63xx - or 1. Tap in the NAVIGATION window of the navigation software on the (Exit) button. 2. Tap on Standby. Automatic Standby You can configure the NAVIGON 63xx so that the navigation device is automatically switched to standby mode. ► ► ► In the NAVIGATION window tap on Options > Settings > General > Automatic Standby. Select after how much time you want the navigation device to be switched to standby mode (Never, After 10 mins, After 20 mins, After 30 mins).
User’s manual NAVIGON 63xx 4 Password Lock You can protect your navigation system from unauthorised use by creating a password. 4.1 Activating password protection 1. In the NAVIGATION window tap on Options > Settings > Options > Password Lock. The NEW PASSWORD window opens. 2. Enter a password in the New password box and tap on Next. 3. Enter this password again in the Confirm new password box. 4. Tap on Activate. Note: The password must have exactly 4 digits. 4.2 Changing a password 1.
User’s manual NAVIGON 63xx 4.4 Forgotten your password? If you enter the password wrongly three times, a window will open with instructions telling you what to do now. ► Follow the instructions on the screen. 5 Operating the NAVIGON 63xx 5.1 Information Various information symbols are located at the top of many windows. GPS The GPS symbol can show the following GPS reception status: No GPS (No symbol): The built-in GPS receiver is not operational. Contact us if the problem persists.
User’s manual NAVIGON 63xx TMC (Traffic Information) The NAVIGON 63xx has an integrated TMC receiver which provides the navigation system with traffic information updates. If necessary it can change your route dynamically, for example in order to avoid a traffic jam. Note: This function is only available if TMC traffic messages are being transmitted in the country in which you are travelling. This is not the case in all countries.
User’s manual NAVIGON 63xx Bluetooth / Phone The NAVIGON 63xx has an integrated Bluetooth hands-free module. This enables you to use the device as a hands-free kit for a mobile phone with Bluetooth capability. The Phone symbol can display the following states of the hands-free module: No Bluetooth (No symbol): The Bluetooth function is deactivated. Not connected (red mobile phone): The NAVIGON 63xx has no Bluetooth connection to another device.
User’s manual NAVIGON 63xx 5.2.1 Special keys inserts a space. deletes the character in front of the cursor. opens the keyboard with numerals. Latin, Cyrillic and Greek alphabet opens the keyboard with the Latin alphabet. opens the keyboard with the Cyrillic alphabet. opens the keyboard with the Greek alphabet. When you want to enter addresses, names or POIs, the keyboard with the alphabet for the country in question will open automatically.
User’s manual NAVIGON 63xx As soon as you have entered a special character, the letter keyboard reappears automatically. 5.2.2 Entering data Often you can select an entry from a list. This is the case, for example, when you enter a location. As soon as you enter the first letter, the largest city in the given country that begins with this letter appears. Enter more letters and after each entry the first city which begins with these letters will appear.
User’s manual NAVIGON 63xx If you would like to quit the options list without selecting a function, tap on the button you used to open the menu. 6 Voice Command Note: The Voice Command function is not available in every language. For languages in which this function is available, the NAVIGATION button is shown in the Voice Command window. For languages which are not supported, the Voice Command button is replaced by the Show Map button.
User’s manual NAVIGON 63xx 6.3 Deactivation of the voice commands function The voice commands function will be deactivated under the following conditions: ► ► 6.4 If you operate the navigation device with your finger while a voice command is expected from you. If a call is received and during an active phone call if the navigation device is being used as a hands-free module. Configuring the voice commands function You can configure for which tasks you want to use voice commands.
User’s manual NAVIGON 63xx Impaired GPS reception If GPS reception is impaired, navigation will be interrupted. As soon as GPS reception is restored, the navigation system calculates any change of position which has occurred in the meantime. Navigation is then continued automatically. Arriving at your destination When you have reached your selected destination, a message to this effect will be displayed. Only your current position (orange arrow) and the destination flag will now be shown on the map. 7.
User’s manual NAVIGON 63xx The integrated GPS receiver is not initialised for the first time until the navigation application is started for the first time. It can take up to 20 minutes to initialise the GPS receiver for the first time. Note: If the GPS symbol indicates GPS Ready after far less than 20 minutes, it is advisable to leave the navigation device switched on for at least another 15 minutes in order to ensure reliable operation of the receiver.
User’s manual NAVIGON 63xx Under My Destinations the NAVIGON 63xx provides the following lists of destinations and addresses for you to select from: ► ► ► FAVOURITES: All destinations that you have entered in the NAVIGON 63xx and then saved. LAST DESTINATIONS: Destinations to which you have navigated on a previous occasion. IMPORTED ADDRESSES: Here there may be 2 lists to choose from: ► ► 7.2.1 OUTLOOK / INTERNET: All destinations which you have imported from Microsoft Outlook or from the Internet.
User’s manual NAVIGON 63xx 4. Enter the house number. If you do not know the house number, then leave this field empty. If you don't know the house number but know the name of a nearby side street, then tap on the Cross Street box and enter the name of this street. The navigation system will calculate a route to the intersection of the streets you have entered. The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
User’s manual NAVIGON 63xx 1. In the NAVIGATION window tap on New Destination > Enter an Address. The ADDRESS window opens. 2. In the ADDRESS window, tap on Options > Enter Coordinates. The ENTER COORDINATES window opens. Entering as a decimal number 3. Enter the degree of latitude. Begin the entry with a minus sign if you want to enter a southern degree of latitude. 4. Enter the degree of longitude. Begin the entry with a minus sign if you want to enter a western degree of longitude.
User’s manual NAVIGON 63xx Note: If the destination with the coordinates you entered does not lie on the road system covered by the map, navigation will be performed as far as the nearest road point using the mode defined by the selected route profile. From this point on, the navigation system will automatically switch to Offroad mode. (Refer to "Navigation in Offroad mode" on page 60) 7.2.
User’s manual NAVIGON 63xx 4. Say the number of the destination to which you want to navigate. Say "Up" or "Down" in order to scroll in the list. When you have selected a destination, the map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 39. Please read on there. Note: The Voice Command function is not available for every language.
User’s manual NAVIGON 63xx If sub-categories exist for the category you have selected, the Sub Category list opens. 3. Select the sub-category from which you would like to select a POI. The Destination list opens. It contains the nearest POIs in the specified category, sorted by distance. 4. If the list is very long: ► Tap on (Close List). The keyboard appears. ► ► Enter a number of letters from the destination. Tap on (Open List).
User’s manual NAVIGON 63xx 3. If the list is very long: ► Tap on (Close List). The keyboard appears. ► ► Enter a number of letters from the destination. Tap on (Open List). The list now contains only those destinations which begin with or contain the letters entered. 4. Tap on the name of the destination. The DETAILED INFORMATION ABOUT THE DESTINATION window opens. Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No).
User’s manual NAVIGON 63xx 5. If the list is very long: ► Tap on (Close List). The keyboard appears. ► ► Enter a number of letters from the destination. Tap on (Open List). The list now contains only those destinations which begin with or contain the letters entered. 6. Tap on the name of the destination. The DETAILED INFORMATION ABOUT THE DESTINATION window opens. Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No).
User’s manual NAVIGON 63xx Note: GPS reception must be good enough for determining your position. Check the (GPS Ready) symbol to see whether GPS reception is good enough. For more details refer to the chapter "Initialising the GPS receiver" on page 25. 1. In the NAVIGATION window tap on New Destination. The NEW DESTINATION menu opens. In the Direct Access area you are shown the symbols of those POI categories that are available by direct access. 2.
User’s manual NAVIGON 63xx Note: The Call function is only available when the NAVIGON 63xx is connected via Bluetooth to a mobile phone. For details of how to connect to a mobile phone refer to chapter "Connection with Mobile Phone" on page 79. 7.2.7 Favourites Destinations to which you want to travel often can be saved in the FAVOURITES list. In the FAVOURITES list you can save up to 500 destinations. Information on how to save a destination can be found in chapter "Saving destinations" on page 41. 1.
User’s manual NAVIGON 63xx Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No). ► Tap on Activate MyRoutes in order to change the setting. 3. Tap on Start Navigation. - or Tap on Parking in order to search for and navigate to a car park near your destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 39.
User’s manual NAVIGON 63xx For detailed information on how to start navigation, please refer to chapter "Route preview" on page 39. Please read on there. 7.2.10 Imported Addresses from the phone book The phone book of a mobile phone with which you are connected can be imported into the NAVIGON 63xx. Addresses from the phone book are then found in the IMPORTED ADDRESSES FROM THE PHONE BOOK list. 1. In the NAVIGATION window tap on My Destinations > Imported Addresses > From the phone book. 2.
User’s manual NAVIGON 63xx 7.2.12 Selecting destinations on the map You may select a destination directly on the map. This is a quick way to select towns, streets and POIs. 1. In the NAVIGATION window tap on > Options > Show Map. Note: If the voice commands function is not available for the language of the user interface, the Show Map button will be directly in the NAVIGATION window. 2. Tap on (Destination search) The map opens in Destination search mode. 3.
User’s manual NAVIGON 63xx Route profiles take account of the characteristics and special aspects of the different modes of transport. For example a route profile for bicycles will exclude motorways from the route calculation but will include roads which other vehicles are not allowed to use. And a bicycle profile will calculate different arrival times than a motorcycle profile. Note: If you select a pedestrian profile, a type of navigation specially developed for pedestrians will be started.
User’s manual NAVIGON 63xx If you select a route for which traffic obstructions have been announced, the PREVIEW TMC window may open before navigation starts. (Refer to "Preview TMC" on page 73) ► Select whether you want to use the original route (Current Route) or a detour (Alternative Route). No GPS reception If GPS signal reception is not good enough, the following message will appear: "GPS reception is currently not sufficient. Navigation starts automatically as soon as GPS reception is OK again.
User’s manual NAVIGON 63xx 1. Select a destination from the LAST DESTINATIONS list or from the IMPORTED ADDRESSES list. (Refer to "Last Destinations" on page 36 or "Imported Addresses: Outlook / Internet" on page 37). Do not tap on the Start Navigation button! 2. Tap on Options > Save as Favourite. 3. Enter a name for the destination. 4. Tap on Save. 7.3.2 Defining the home address You can always start navigation to your home address very quickly by tapping in the NAVIGATION window on Take Me Home.
User’s manual NAVIGON 63xx 7.4 Multi-leg routes or tracks It is possible to plan routes without GPS reception, for example in the comfort of your home. Planned routes can be saved for later use. This allows you to plan as many routes as you like, for example for your holidays. 1. In the NAVIGATION window tap on Options. The options list opens. 2. Tap on the Routes and Tracks option. The ROUTES AND TRACKS window opens. 7.4.
User’s manual NAVIGON 63xx 7.4.2 Entering route points The route points of a route are the destinations that you want to navigate to. The flow number for each route point is indicated on a button in front of it. 1. Tap on the Add Route Point box. The ROUTE POINT menu opens. 2. Tap on the button for how you want to enter the destination. 3. Enter the route point. (Refer to the corresponding section of the chapter "Specifying a destination" on page 26). 4. Tap on Add.
User’s manual NAVIGON 63xx Saving routes The ROUTES AND TRACKS window is open. You have entered the starting point and at least one route point. 1. Tap on Options > Save Route. 2. Enter a name for the route. 3. Tap on Save. The destination is now saved to the SAVED ROUTES AND TRACKS list. 7.4.5 Loading routes or tracks 1. Tap on Options > Saved Routes and Tracks. The SAVED ROUTES AND TRACKS list opens. It shows all the saved routes and tracks in alphabetical order.
User’s manual NAVIGON 63xx The starting point and the route points are marked by flags. The distance and the estimated trip time is given for each leg of the route. 7.4.7 Simulating routes It is also possible simply to simulate navigation on a planned route. Note: GPS reception is not necessary for simulation. If you have planned a multi-leg route, only the first leg will be simulated. You have calculated and displayed a route. 1. Tap on Options > Simulation.
User’s manual NAVIGON 63xx ► Tap on the Route Profile button if you want to select a different route profile. For details of how to create and select route profiles refer to chapter "Route profiles" on page 62. Note: When you load routes which originate from a different provider than NAVIGON, it may be impossible for you to change the route profile of this route. Turn-by-Turn List If you want to see detailed directions for the route, tap on Options > Turn-by-Turn List.
User’s manual NAVIGON 63xx If you select a route for which traffic obstructions have been announced, the PREVIEW TMC window may open before navigation starts. (Refer to "Preview TMC" on page 73) ► Select whether you want to use the original route (Current Route) or a detour (Alternative Route). No GPS reception If GPS signal reception is not good enough, the following message will appear: "GPS reception is currently not sufficient. Navigation starts automatically as soon as GPS reception is OK again.
User’s manual NAVIGON 63xx Saved Routes and Tracks: Opens a window in which you can load a saved route or a track. GPS Status: Opens the GPS STATUS window. Here you can see details regarding GPS reception. You can also save the data of your current location. (Refer to "GPS Status, saving the current location" on page 71) Home Address: Saves the selected destination as your home address.
User’s manual NAVIGON 63xx Product Information: Here you are shown the version numbers and copyright details of the hardware and software. Save Route: Opens a window in which you can save the planned route under a specific name. (Refer to "Saving routes" on page 45) Routes and Tracks: Opens the ROUTES AND TRACKS window. Here you can plan routes, manage planned routes and start navigation on a planned route. (See "Multi-leg routes or tracks" on page 43) Route Profile: Opens the ROUTE PROFILE window.
User’s manual NAVIGON 63xx Save Destination: Saves the selected address in the FAVOURITES list. (Refer to "Saving destinations" on page 41) Add to Route: Opens the route planning. The address specified will be added as a route point. (Refer to "Multi-leg routes or tracks" on page 43) Interim Destination: Sets the selected point as interim destination. The navigation system will first guide you to this interim destination. Afterwards you can continue navigation to your original destination.
User’s manual NAVIGON 63xx The following features are typical for this view: ► ► Indicated in the middle of the lower third is your current position (orange arrow). The map view follows your movements so that your position is always visible on the screen. The scale of the map changes according to your speed. Map options in Standard mode ► Tap on Options. A window with several buttons opens. The most important functions for navigation can be reached via buttons with symbols.
User’s manual NAVIGON 63xx 1 When the MyRoutes function is activated, up to three numbered routes are indicated on the map in different colours (orange, green, blue). In the following cases only one route is shown: 2 ► The MyRoutes function is deactivated. ► You have planned a route with more than one route point. ► A route profile with the Pedestrian speed profile is active. ► The route includes a track. The current position is indicated (orange arrow).
User’s manual NAVIGON 63xx 5 The destination is marked with a little flag. If you display a planned or loaded route, the starting point and each route point will be marked with a little flag. In the case of a multi-leg route, the distance and the estimated driving time for each leg are displayed. ► ► Tap on the (Route Profile) button (refer to the figure, point 3) in order to select a different route profile.
User’s manual NAVIGON 63xx 2 Here you can see any speed limits, warning signs or prohibiting signs (refer also to "Warn from bends" on page 69). 3 The route is highlighted in orange. 4 When two manoeuvres need to be executed in quick succession, the small arrow box indicates the second manoeuvre to be executed. 5 The large arrow box shows a diagram of the next junction which you should turn on to. The distance remaining to this junction is indicated underneath.
User’s manual NAVIGON 63xx For a description of the Parking function refer to chapter "Parking near the destination" on page 67. 8 Ahead of many junctions the information from points 9 and 10 is hidden. Instead you are shown which lanes lead to your destination. ► Tap on the box in order to hide the lane information. 9 The height above sea level and the current speed are shown here.
User’s manual NAVIGON 63xx Volume The volume of the spoken driving instructions can be adjusted during navigation. 1. Tap on (Volume). The volume bar opens. It contains three buttons for adjusting the volume: (Louder), 2. Tap on (Quieter), (Volume on/off). (Volume) again or wait a few seconds. The volume bar closes.
User’s manual NAVIGON 63xx 9.4.2 Navigation in Pedestrian mode This mode is active if you have selected a pedestrian route profile for the navigation. These profiles can be identified by the symbol. (Pedestrian) After the route was shown in Preview mode, navigation was started. You receive a route proposal which is calculated on the basis of the digitalised road system. You are also shown in which direction your destination lies.
User’s manual NAVIGON 63xx 5 The route which was calculated using the digitalised road system is marked in orange. 6 In this box you are shown the distance remaining to the destination (beeline). 7 The compass indicates where north is. 8 The scale of the map section shown is indicated here. The length of the ruler corresponds to the distance indicated. Operating the map Zoom Out: The map section shown becomes larger, but you will see fewer details.
User’s manual NAVIGON 63xx ► 9.4.4 If more route points follow after the track, the navigation will switch back to the originally selected mode. Navigation in Offroad mode Note:This mode does not become active if you have selected a pedestrian route profile for the navigation. These profiles can be identified by the (Pedestrian) symbol. Nor does it become active if you are navigating along a track.
User’s manual NAVIGON 63xx 9.5 Map in Destination search mode The map is always in Destination search mode, when a pair of cross hairs are to be seen. Indicated in the address box are the coordinates and, where applicable, the name of the street under the cross hairs. When you are driving, the map does not change. It is always orientated with north at the top. Zoom Out: The map section shown becomes larger, but you will see fewer details.
User’s manual NAVIGON 63xx 9.5.1 Operating in Destination search mode 1. Tap on the point to which you want to navigate. The destination that you have selected appears under the cross hairs. The geographical coordinates of the destination and the corresponding address are shown in the bottom third of the screen. 2. Tap on (OK). Buttons with various functions will be displayed. Take Me There: Starts navigation to the selected point.
User’s manual NAVIGON 63xx 10.1.1 Route profile settings A route profile is made up of several settings: ► ► ► ► ► Speed Profile: defines the mode of transport (e.g. Bicycle, Pedestrian, Car, ...) Type of Route: defines the type of route which is to be calculated (e.g. Short Route, Fast Route, ...
User’s manual NAVIGON 63xx To have a choice of different profiles for example for several cars, you can create your own route profiles. 10.1.3 Creating a new route profile You can create your own route profiles. This makes sense for example if you own two cars and only one has a prepaid toll disc for Austrian motorways. 1. Tap on Options > Settings. If the map is open in Standard mode, tap on Options > General > Settings. (Current Route Profile) button. This button can also 2.
User’s manual NAVIGON 63xx 2. Tap on the (Current Route Profile) button. This button can also show a different symbol. 3. Tap on the want to edit. (Edit) button alongside the route profile that you 4. Make the required settings. 5. Tap on OK. The Use of toll roads setting is comprised of several individual settings. For example for each country with toll motorways you can select whether you want to use these roads for the navigation. 1. Tap on the (Edit) button alongside the Use of toll roads setting.
User’s manual NAVIGON 63xx 4. Tap on Options > Delete. 5. A dialog window prompts you to confirm deletion. 6. Tap on Yes. 7. Tap on (Back). Note:Basic profiles cannot be deleted. 10.2 Screenshots You can create and save screenshots of the content currently shown on the screen at any moment. 10.2.1 Enabling screenshots 1. In the NAVIGATION window tap on Options > General > Enable Screenshots. 2. Select whether you want to enable screenshots (Yes) or not (No).
User’s manual NAVIGON 63xx 1. Tap on Options > Services > Start Recording. The START RECORDING window opens. 2. Enter a name for the planned recording. Note: Only Latin characters are available for naming tracks. 3. Tap on Start Recording. Starting from your current position, the navigation device will record the entire route you now take. The (Record Track) symbol appears at the top right edge of the screen throughout the recording.
User’s manual NAVIGON 63xx The following scenarios are imaginable: Continuing on foot You see a car park, park your vehicle and want to continue to the destination on foot. 1. Tap the (Parking) button. 2. Tap on Pedestrian mode. The following message appears: "Your current position has been saved. You will find it in the 'Favourites' list as 'My Vehicle'. This enables you to easily find the way back to your vehicle." 3. Tap on OK.
User’s manual NAVIGON 63xx Back to the destination You have reached your destination. Navigation has ended. For some reason, however, you carry on driving, perhaps because you were unable to find a place to stop. Now you want to be guided back to the destination. 1. Tap on the (Parking) button. 2. Tap on Last Destination. The navigation now guides you back to the original destination in the mode corresponding to the selected route profile. 10.
User’s manual NAVIGON 63xx If you approach a bend quickly or too quickly, the left) symbol will appear on the screen or the symbol will appear in the apex of the bend. At the same time the (Bend to the (Bend to the right) (Warning - bend to the left) or (Warning - bend to the right) sign will be shown on the screen at top left. Caution! Warnings of bends do not relieve you of your duty to pay full attention at all times to what is happening on the road.
User’s manual NAVIGON 63xx ► You can use the (Up) and (Down) buttons to select other help points in the selected category. The help points are sorted by distance from your current position. ► Use the window. (Back) button to return to the DIRECT HELP Note: Only those help points are displayed which are situated no further than than 30 mi from your position. 10.
User’s manual NAVIGON 63xx The system recalculates the route. The blocked route section will be avoided. It is marked on the map in red. Unblocking a route section ► Tap on Options > Unblock. The block will be lifted. The system recalculates the route. The unblocked route section can now be integrated into the calculation. 10.10 Turn-by-Turn List You can display detailed directions of the calculated route before starting navigation or at any time during navigation.
User’s manual NAVIGON 63xx Blocking route sections 1. Tap on the route sections that you do not want to travel on so that the (Forbid) symbol appears next to them. 2. Tap on (Modify Route). The navigation system calculates an alternative route avoiding the route sections selected. The new driving instructions are displayed in the TURN-BY-TURN LIST window. 3. Tap on window again.
User’s manual NAVIGON 63xx The PREVIEW TMC window opens. It shows a map view with the route section affected by the message. If the reported obstruction is likely to involve a considerable loss of time, a possible detour will also be shown. Zoom Out: The map section shown becomes larger, but you will see fewer details. Zoom In: The map section becomes smaller, but you will see more details. Original map section: The original map section is shown again. ► Tap on the button of the route you want to follow.
User’s manual NAVIGON 63xx You can use the messages. ► 1 3 (Down) buttons to scroll in the list of (Back) in order to close the TRAFFIC INFORMATION The Traffic Information button shows the type of traffic messaging listed and how many messages of this type are in the list. ► 2 Tap on window again. (Up) and Tap on Traffic Information in order to select the messages you want displayed. This mark indicates that the message in question comes from a PremiumTMC provider.
User’s manual NAVIGON 63xx 5 Here you can see in which state the obstruction lies. Note: Most radio stations report only traffic obstructions in their own state. 6 Here the reported obstruction is displayed as a traffic sign. 7 Here the affected road is indicated. 8 Here you can see on which section of the road the obstruction lies. 9 This symbol appears only when the reported obstruction affects your route.
User’s manual NAVIGON 63xx ► ► ► Automatic: Use the arrow buttons in the station section to tune into another station. The system will search for another station if reception becomes poor. Hold station: Use the arrow buttons in the station section to tune into another station. The system will search for the same station on a different frequency if the signal becomes poor. Hold frequency: You can use the arrow keys in the station area to select another frequency.
User’s manual NAVIGON 63xx ► If you don't want to record the trip in question, tap on (Cancel). - or - 1. In the Reason for the Trip box select a reason for the trip from the list of possibilities. 2. Enter a name for this entry, e.g. "Trip to customer X", in the Logbook Entry box. 3. Enter the mileage. 11 Handsfree Module The hands-free module supports Bluetooth connections to Bluetoothcapable mobile phones and headsets.
User’s manual NAVIGON 63xx ► 11.1 Tap on (Back) in order to close the hands-free module and return again to the previously opened window. Connection with Mobile Phone For you to be able to use the Bluetooth function of the NAVIGON 63xx, the navigation device must be connected to the Bluetooth device. Note: Both the NAVIGON 63xx and the mobile phone must be configured accordingly in order for a Bluetooth connection to be set up between the two devices. Headsets are suitably configured at the factory.
User’s manual NAVIGON 63xx 2. Tap in the HANDSFREE MODULE window on the Devices) button. (Trusted The TRUSTED DEVICES window opens. 3. Tap on Options > Search for Devices. The navigation device starts the search for Bluetooth devices and lists all the devices it recognises in the DISCOVERED DEVICES window. The symbol to the left of the device name indicates whether the device is a mobile phone or a headset. Pairing with a device 4.
User’s manual NAVIGON 63xx The NAVIGON 63xx prompts you to enter a password. 5. Enter the same password in the Key box as on the mobile phone and tap on (OK). The pairing is performed and a connection is set up between the two devices. The connected device is indicated in the TRUSTED DEVICES list. (Green symbol 11.1.3 (Connected).) Connecting to a device The word connect describes any subsequent connections between paired Bluetooth devices. No further password entry is necessary when connecting.
User’s manual NAVIGON 63xx 3. Tap in the TRUSTED DEVICES window on the (Connect) button or on the name of the device you want to connect to. If a connection currently exists to a different device, the connection will be disconnected. The NAVIGON 63xx connects to the selected device. 11.1.4 Deleting a device You can delete the connection data of paired devices. The device is then no longer shown in the TRUSTED DEVICES list.
User’s manual NAVIGON 63xx Editing and updating a phone book The phone book cannot be edited in the hands-free module. If you want to change or delete an entry in the phone book, you must make the changes on your mobile phone and then update the phone book on the hands-free module. The phone book is re-imported for the update. 1. Set up a connection to the mobile phone whose phone book you want to update. (Refer to chapter "Connecting to a device" on page 81) 2.
User’s manual NAVIGON 63xx ► Tap on Accept if you want to take the call. The CALL IN PROGRESS window opens. ► Tap on Reject if you do not want to take the call. Note: Navigation instructions are muted during a call. 11.3 Making a call With the NAVIGON 63xx you can make a call in various ways: 11.3.1 Making a call with the voice commands function It is particularly convenient to make a call with the voice commands function. 1. In the HANDSFREE MODULE window tap on Voice Command.
User’s manual NAVIGON 63xx Note: The Voice Command function is not available for every language. 11.3.2 Dialling a telephone number 1. Tap in the HANDSFREE MODULE window on the Keyboard button. The TELEPHONE NUMBER window opens. 2. Enter the desired telephone number. 3. Tap on the Call button. 11.3.3 Dialling a Speed Call number You can configure 4 Speed Call buttons. ► Tap in the HANDSFREE MODULE window on the corresponding Speed Call button.
User’s manual NAVIGON 63xx 1. Tap in the HANDSFREE MODULE window on the Recent Calls button. ► If the recent calls on the connected phone were not yet imported, the import will be started now; refer to "Import recent calls" on page 83. The RECENT CALLS list opens. The entries are sorted chronologically; the symbols to the right of the entry indicate the type of call: (Missed calls) (orange) (Incoming calls) (white) (Outgoing calls) 2. Tap on the entry you want.
User’s manual NAVIGON 63xx 11.4.2 Entering numbers You can enter numbers during a call. This may be the case, for example, if a further connection via a telephone system is necessary. 1. Tap on Keyboard. 2. Enter the desired numbers. (Back) in order to open the CALL IN PROGRESS 3. Tap on window. 11.4.3 Muting the microphone During the call, you can mute the microphone so that you can talk to someone without the interlocutor hearing. ► In the CALL IN PROGRESS window, tap on switch off the microphone.
User’s manual NAVIGON 63xx 4. Tap on the (Start Navigation) button alongside the address you want to navigate to. You can also select addresses from the phone book in the navigation software to act as destinations. For more details refer to the chapter "Imported Addresses from the phone book" on page 38. 11.6 Configuring the hands-free function The hands-free module of the NAVIGON 63xx contains a number of settings that can be individually configured.
User’s manual NAVIGON 63xx Deleting a Speed Call number 3. Tap on the (Delete) button. 4. Confirm that you want to delete the Speed Call number. The PRESET window opens again. No phone numbers and no name exist any longer for the selected Speed Call button. 11.6.2 Settings In the SETTINGS window you can configure the settings for the phone functions of the hands-free module of your NAVIGON 63xx. ► In the HANDSFREE MODULE window, tap on Options > Settings. The SETTINGS window opens.
User’s manual NAVIGON 63xx 12 Configuring the NAVIGON 63xx The SETTINGS window is the starting point for customising the NAVIGON 63xx to match your personal preferences. Settings can be accessed via the options in the NAVIGATION window and via the options in many windows of the navigation application. ► Tap on Options > Settings. The SETTINGS window of the navigation application has several buttons: Navigation, Route Profile, Map Display and General.
User’s manual NAVIGON 63xx 13 Appendix 13.1 Technical data Dimensions Weight Operating conditions 119 x 75.9 x 20.9 mm approx.
User’s manual NAVIGON 63xx 13.2 §1 NAVIGON – Licensing Policy Scope of Regulations This Agreement regulates the relations between the user and NAVIGON AG, Schottmuellerstrasse 20 A, 20251 Hamburg, developer and proprietor of the exclusive utilization rights to the NAVIGON software (“Software”) as specified in the order. Subject matter of this Agreement shall be deemed to be copyright interests.
User’s manual NAVIGON 63xx (2) Any kind of not explicitly authorized copying of the Software in its entirety or partially, any kind of not expressly authorized passing on of the Software and development of similar Software or segments of such Software or utilization of the contractual Software as master template shall in particular be deemed to be judicially and contractually prohibited.
User’s manual NAVIGON 63xx §5 Reproduction Rights and Access Security (1) The user may reproduce the Software, if the respective copying should be necessary for operations. Necessary reproduction shall be deemed to be the installation of the program from the original data carrier to the bulk memory of the installed hardware as well as loading the program into random access memory. (2) Furthermore, the user is permitted to make copies for back-up purposes.
User’s manual NAVIGON 63xx §7 Third Party Software The Software contains third party software products, which has been integrated into the contractual Software or supplied together with the contractual Software. NAVIGON fundamentally only awards such rights which are necessary for general use of the programs as components of the contractual Software and which NAVIGON is authorized to grant. No modification rights or further processing rights are incorporated therein.
User’s manual NAVIGON 63xx (4) If the user should be a businessman within the meaning of the Commercial Code, legal entity under public law or special assets under public law, all disputes which may arise in connection with the accomplishment of these contractual regulations shall fall under the jurisdiction of Hamburg. 13.3 Identification and serial number The navigation system comes with various identification labels (e.g. CE label, serial number, ...). (Examples: CE mark, serial number, ...
User’s manual NAVIGON 63xx 14 Troubleshooting In this chapter you will find solutions to problems which may arise during use of the NAVIGON 63xx. This list does not claim to be complete. Answers to many other questions can be found on the NAVIGON AG website. (Refer to "Questions about the product" on page 8) I have connected a charger to the NAVIGON 63xx. A connection to a computer is shown on the display. - or I have connected the NAVIGON 63xx to a computer but it is not detected as a removable disc.
User’s manual NAVIGON 63xx 3. Set Use Voice Command to Entering Addresses. 4. Tap on OK. 5. Tap on (Phone). 6. Tap on Settings > Bluetooth Settings. 7. Set Bluetooth Function to No. 8. Tap on OK. 9. Tap on (Navigation). The NAVIGATION window is now open again. I have accidentally activated demo mode. If you have accidentally activated demo mode when you start the navigation application for the first time, you can deactivate it again as follows: 1. In the NAVIGATION window, tap on Options > Settings.
User’s manual NAVIGON 63xx 15 Index B Bend Warning.................................... 69 Block............................................ 71, 73 Bluetooth Connect ........................................ 81 Pairing........................................... 79 Bluetooth ........... see Handsfree Module C Call Dial Number .................................. 85 Phone Book .................................. 85 Preset ........................................... 85 Recent Calls .............................
User’s manual NAVIGON 63xx Handsfree Module Connection with Mobile Phone ..... 79 Delete Device ............................... 82 Dial Number .................................. 85 Enter numerals ............................. 87 Hang up ........................................ 87 Import Phone Book ....................... 82 Import recent calls ........................ 83 Incoming Call ................................ 83 Muting ........................................... 87 Open ............................
User’s manual NAVIGON 63xx NAVIGON Fresh.................................. 9 NAVIGON Suite................................... 9 NAVIGON Sync................................... 9 Nearby............................................... 69 New Destination ................................ 26 O Options .................................. 16, 22, 48 P Pairing ............................................... 79 Parking Last Destination ............................ 69 Parking Close to Destination ........
User’s manual NAVIGON 63xx T Take Me Home............................ 38, 42 TMC Preview TMC ................................ 73 Recalculate Route ........................ 77 Show............................................. 74 Symbols ........................................ 19 Tuning Mode ................................. 76 TMC Settings Recalculate Route ........................ 77 TMC .............................................. 76 Traffic Information......................... 76 Tuning Mode .........
